MC KEES ROCKS, PA ·
OSHA Inspection: SILVER STAR MEATS INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SILVER STAR MEATS INC. in 1720 MIDDLETOWN ROAD P.O. BOX 393, MC KEES ROCKS, PA 15136 (NAICS 424470). OSHA activity number 337871818.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SILVER STAR MEATS INC.
- Site address
- 1720 MIDDLETOWN ROAD P.O. BOX 393
- City
- MC KEES ROCKS
- State
- PA
- ZIP
- 15136
- Mailing
- 1720 MIDDLETOWN ROAD P.O. BOX 393, MC KEES ROCKS, PA 15136
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424470
- Employees
- 75
- Ownership type
- Private (A)
Citations
8 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jan 25, 2013
- Abate by
- Feb 21, 2013
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Facility - 1720 Middletown Road, McKees Rocks, PA 15136: On or about December 12, 2012, employees were observed locking out a motor to perform maintenance and the employer did not develop energy control procedures.
Recent events (2)
- · I (S) $1680
- · Z (S) $2800
1910.147 C05 II D
- Issued
- Jan 25, 2013
- Abate by
- Feb 1, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(5)(ii)(D): Lockout devices and tagout devices did not indicate the identity of the employee applying the device(s): (a) Facility- 1720 Middletown Road, McKees Rocks, PA 15136: On or about December 12, 2012, employees were observed locking out an evaporator and the lock out device did not indicate who locked out the equipment.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.147 C07 I
- Issued
- Jan 25, 2013
- Abate by
- Feb 22, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: (a) Facility- 1720 Middletown Road, McKees Rocks, PA 15136: On or about December 12, 2012, employees were observed locking out the evaporator and the employer did not provide training for employees before locking and tagging out the equipment in the facility.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.212 A01
- Issued
- Jan 25, 2013
- Abate by
- Feb 6, 2013
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Facility- 1720 Middletown Road, McKees Rocks, PA 15136: On or about December 12, 2012, employees were exposed to approximately one foot of an exposed blade while operating the band saw.
Recent events (2)
- · I (S) $2100
- · Z (S) $3500
1910.212 A03 II
- Issued
- Jan 25, 2013
- Abate by
- Mar 13, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) Facility- 1720 Middletown Road, McKees Rocks, PA 15136: On or about December 12, 2012, employees were not properly protected from the blades while operating the mixer due to the spacing in the existing guard.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.215 B09
- Issued
- Jan 25, 2013
- Abate by
- Feb 6, 2013
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) Facility- 1720 Middletown Road, McKees Rocks, PA 15136: On or about December 12, 2012, employees were using the Delta 8 inch Bench Grinder and the distance between the safety guard and the abrasive wheel measured approximately one inch.
Recent events (2)
- · I (S) $1260
- · Z (S) $2100
1910.242 B
- Issued
- Jan 25, 2013
- Abate by
- Feb 13, 2013
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: (a) Facility- 1720 Middletown Road, McKees Rocks, PA 15136: On or about December 12, 2012, employees were observed using compressed air rated at approximately 125 p.s.i., to clean debris from their machines.
Recent events (2)
- · I (S) $1260
- · Z (S) $2100
1910.1200 H01
- Issued
- Jan 25, 2013
- Abate by
- Feb 21, 2013
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (a) Facility- 1720 Middletown Road, McKees Rocks, PA 15136: On or about December 12, 2012, employees were not trained on the chemicals they are exposed to in the facility such as but not limited to ammonia, MP 39, and MP 66.
Recent events (2)
- · I (S) $1260
- · Z (S) $2100
More inspections in this industry (NAICS 424470)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 337871818.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.