Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ARAGUZ CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ARAGUZ CONSTRUCTION in 1701 N. 32ND ST., MUSKOGEE, OK 74401 (NAICS 238130). OSHA activity number 337951818.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Araguz Construction — free Get an email when a new federal OSHA severe-injury report for Araguz Construction is published. One employer, no account, unsubscribe in one click.
Establishment
ARAGUZ CONSTRUCTION
Site address
1701 N. 32ND ST.
City
MUSKOGEE
State
OK
ZIP
74401
Mailing
10627 BLUESTONE CREEK ST., SAN ANTONIO, TX 78254
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
6
Ownership type
A

4 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 5 1 instance 3 exposed
Issued
Feb 5, 2013
Abate by
Feb 28, 2013
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1910.178(l)(1)(i):     The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):      On or about November 1, 2012, at the jobsite an employee was observed operating a forklift truck without prior training or evaluation by a qualified person.  Employees were exposed to hazards caused by inexperienced forklift truck operator.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1926.451 C02 V

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 5, 2013
Abate by
Feb 8, 2013
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1926.451(c)(2)(v):     Fork-lifts were used to support scaffold platforms while the entire platform was not attached to the fork and the fork-lift was moved horizontally while the platform was occupied:      On or about November 1, 2012, employees were observed working from a homemade wood platform mounted to a forklift truck and was raised to a height approximately 27 feet high.  The wood platform was observed not properly secured to the forklift truck.  Employees were exposed to fall hazards.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1926.501 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 5, 2013
Abate by
Feb 8, 2013
Penalty
Initial $2,000 · Current $800 Reduced
29 CFR 1926.501(b)(1):     Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.      On or about November 1, 2012, at the job site employees were observed working on a walking/working unprotected side or edge of a building more than 6 feet high to the lower levels.  The employees were not wearing personal fall arrest system or having any other type of fall protection systems provided.  The employees were exposed to fall hazards.
Recent events (2)
  • — I (S) $800
  • — Z (S) $2000

1926.602 C01 II

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 5, 2013
Abate by
Feb 28, 2013
Penalty
Initial $2,000 · Current $800 Reduced
29 CFR 1926.602(c)(1)(ii):     Modifications or additions which affect the capacity or safe operation of the equipment were made without the manufacturer's written approval:      On or about November 1, 2012, at the jobsite employees were working from a homemade wood platform which was mounted on an all-terrain forklift truck and raised to a height approximately 27 feet high.  The employer did not have a written approval from the forklift truck manufacturer to allow such addition/modification to the forklift.  The forklift truck or the platform could collapse and injure the employees.
Recent events (2)
  • — I (S) $800
  • — Z (S) $2000

View Araguz Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337951818.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.