MENOMONEE FALLS, WI —
OSHA Inspection: SCAN-PAC MFG., INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of SCAN-PAC MFG., INC. in N84 W13510 LEON ROAD, MENOMONEE FALLS, WI 53051 (NAICS 336399). OSHA activity number 338094410.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SCAN-PAC MFG., INC.
- Site address
- N84 W13510 LEON ROAD
- City
- MENOMONEE FALLS
- State
- WI
- ZIP
- 53051
- Mailing
- N84 W13510 LEON ROAD, MENOMONEE FALLS, WI 53051
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336399
- Employees
- 100
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 5, 2013
- Abate by
- Sep 15, 2013
- Penalty
- Initial $5,049 · Current $3,500 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm in that employees were exposed to combustible friction material dust explosion, deflagration, or other fire hazards while working at or near dust collection systems which were not adequately designed to prevent or minimize employee exposure in the event of a deflagration or other uncontrolled fire event: a) The two outdoor fabric filter media-type dust collectors (baghouses) used for collecting combustible friction material dust (mixture of phenolic resin, synthetic vitreous fibers, barium sulfate, graphite, calcium hydroxide, chromic oxide, iron oxide, aluminum oxide, wollastonite, magnesium oxide, talc, and zinc oxide) were not provided with a means of: i. Explosion protection for the main collector and secondary dust collection bin. ii. Fire protection for the main collector. iii. Deflagration (flame front) propagation protection between the outdoor dust collector units and the upstream processes.
Recent events (2)
- — I (S) $3500
- — Z (S) $5049
1910.132 A
- Issued
- Apr 5, 2013
- Abate by
- Apr 11, 2013
- Penalty
- Initial $3,366 · Current $0 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: (a) Employees were assigned to the dust houses to clean the dust from the dust bins at the North and South dust collectors and were exposed to the hazard of flash fires and were not required to wear flame-resistant garments.
Recent events (2)
- — I (S) $0
- — Z (S) $3366
1910.22 A02
- Issued
- Apr 5, 2013
- Abate by
- Apr 11, 2013
- Penalty
- Initial $3,366 · Current $1,100 Reduced
General-duty citation text
29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained in a clean and, so far as possible, a dry condition: (a) The dust house below the North dust collector had a dust accumulation on the floor that was as thick as 2 inches and exposed employees to fire and deflagration hazards.
Recent events (2)
- — I (S) $1100
- — Z (S) $3366
1910.1025 D02
- Issued
- Apr 5, 2013
- Abate by
- Jun 15, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1025(d)(2): An initial determination was not made to determine if any employee may be exposed to lead at or above the action level: (a) Employees handle copper-zinc-lead alloy which contains 1.5% to 2.5% lead and there had been no air sampling to determine their exposure.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1048 D01 I
- Issued
- Apr 5, 2013
- Abate by
- Jun 15, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1048(d)(1)(i): Employees of a workplace covered by this standard were not monitored to determine their exposure to formaldehyde: (a) Employees handle Plenco phenolic resin and use heated presses to mold the resin were potentially exposed to formaldehyde and there had been no air monitoring to determine their exposure.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Scan-Pac MFG., INC.
View Scan-Pac MFG., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336399)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338094410.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.