WARSAW, NY —
OSHA Inspection: UPSTATE DOOR
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of UPSTATE DOOR in 26 INDUSTRIAL STREET, WARSAW, NY 14569 (NAICS 321911). OSHA activity number 338095417.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UPSTATE DOOR
- Site address
- 26 INDUSTRIAL STREET
- City
- WARSAW
- State
- NY
- ZIP
- 14569
- Mailing
- 26 INDUSTRIAL STREET, WARSAW, NY 14569
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321911
- Employees
- 50
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jan 23, 2013
- Penalty
- Initial $2,100 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about 1/4/13 in the Shaping area; employees are performing set up of shaper ( SCM brand, model # T130 and serial number AB/167264), i.e changing blades without the use of #27 written control of hazardous energy procedures. b) On or about 1/4/13 in the Mill area; employees are performing set up of molder ( Weining brand, serial number 28.07.2004), i.e. changing knives without the use of #46 written control of hazardous energy procedure. c) On or about 1/4/13 in the Sanding area; employees are performing belt changes on the sanding machine ( Batfering brand, model SC0313, serial number 0411490168) without the use of #20 written control of hazardous energy procedure. Abatement Certification
Recent events (2)
- — I (S) $1500
- — Z (S) $2100
1910.147 C07 I A
- Issued
- Jan 23, 2013
- Penalty
- Initial $2,100 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the methods and means necessary for energy isolation: a) On or about 1/4/13 in the Shaping area; employees are performing set up of shaper ( SCM brand, model # T130 and serial number AB/167264), i.e changing blades without being trained on the means and methods for controlling the energy source. b) On or about 1/4/13 in the Mill area; employees are performing set up of molder ( Weining brand, serial number 28.07.2004), i.e. changing knives without being trained on the means and methods for controlling the energy source. c) On or about 1/4/13 in the Sanding area; employees are performing belt changes on the sanding machine ( Batfering brand, model SC0313, serial number 0411490168) without being trained on the means and methods for controlling the energy sources. Abatement Certification
Recent events (2)
- — I (S) $0
- — Z (S) $2100
1910.305 B01 I
- Issued
- Jan 23, 2013
- Penalty
- Initial $2,100 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions: a) On or about 01/04/13 in the Shaping area; the bushing on the junction box at the bottom of the shaper #27 was not connected exposing the conductors (440 volts AC) to the sharp edge. b) On or about 01/04/13 in the Shaping area; the bushing on the junction box at the bottom of the shaper #31 was not connected exposing the conductors (440 volts AC) to the sharp edge. No Abatement Certification
Recent events (2)
- — I (S) $1500
- — Z (S) $2100
More inspections in this industry (NAICS 321911)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338095417.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.