Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: COX MANUFACTURING

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of COX MANUFACTURING in 5500 N LOOP 1604 E, SAN ANTONIO, TX 78247 (NAICS 332721). OSHA activity number 338103419.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch COX Manufacturing — free Get an email when a new federal OSHA severe-injury report for COX Manufacturing is published. One employer, no account, unsubscribe in one click.
Establishment
COX MANUFACTURING
Site address
5500 N LOOP 1604 E
City
SAN ANTONIO
State
TX
ZIP
78247
Mailing
5500 N LOOP 1604 E, SAN ANTONIO, TX 78247
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332721
Employees
65
Ownership type
A

4 citations on file for this inspection.

1910.133 A03

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 12, 2013
Abate by
Apr 18, 2013
Penalty
Initial $1,890 · Current $1,229 Reduced
29 CFR 1910.133(a)(3): The employer did not ensure that each affected employee who wears prescription lenses while engaged in operations that involve eye hazards wears eye protection that incorporates the prescription in its design, or wears eye protection that can be worn over the prescription lenses without disturbing the proper position of the prescription lenses or the protective lenses:    On or about  January 4, 2013; in the Oasis CNC department, an employee(s) was wearing perscription glasses and was exposed to flying particles while using pneumatic air regulated at 30 PSI to clean and inspect products for quality exposing employees to eye injuries.
Recent events (2)
  • — I (S) $1229
  • — Z (S) $1890

1910.219 D01

Serious Gravity 10 2 instances 2 exposed
Issued
Apr 12, 2013
Abate by
Apr 27, 2013
Penalty
Initial $4,410 · Current $2,867 Reduced
29 CFR 1910.219(d)(1): Pulleys, any parts of which were seven (7) feet or less from the floor or working platform, were not guarded in accordance with the standards specified in paragraphs (m) and (o) of this section:    a) On or about  January 4, 2013; in the Torno area, employee(s) were exposed to amputation hazards while operating Strohm Model M125-1 screw machine without guards over the pulleys.    b) On or about January 4, 2013; in the Torno area, employee(s) were exposed to amputation hazards while operating Strohm Model M125-2 screw machine without guards over the pulleys.
Recent events (2)
  • — I (S) $2867
  • — Z (S) $4410

1910.305 G01 IV B

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 12, 2013
Penalty
Initial $1,890 · Current $1,229 Reduced
29 CFR 1910.305(g)(1)(iv)(B): Electrical cords were run through holes in walls, ceilings, and/or floors:    On or about 4 January, 2013; in the maintenance shop, an electrical cord was run through a wall in order to power a work light for a Hardinge industrial metal lathe exposing employees to an electrical shock of 115 V.
Recent events (2)
  • — I (S) $1229
  • — Z (S) $1890

1910.243 B02

Other-than-serious 1 instance 1 exposed
Issued
Apr 12, 2013
Abate by
Apr 20, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.243(b)(2): Airhose and hose connections used for conducting compressed air to utilization equipment was not designed for the pressure and service to which they were subjected:  a) On or about 4 January, 2013, a water hose clamp was used as a means of compressed air hose connection exposing employees to ruptures and/or whipping of the hose.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View COX Manufacturing's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338103419.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.