BRONX, NY —
OSHA Inspection: SAL'S METAL CORP.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SAL'S METAL CORP. in 900 EDGEWATER ROAD, BRONX, NY 10474 (NAICS 423930). OSHA activity number 338178817.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SAL'S METAL CORP.
- Site address
- 900 EDGEWATER ROAD
- City
- BRONX
- State
- NY
- ZIP
- 10474
- Mailing
- 900 EDGEWATER ROAD, BRONX, NY 10474
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423930
- Employees
- 9
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A03 II
- Issued
- Jan 31, 2013
- Abate by
- Feb 12, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): Location: 900 Edgewater Rd Bronx, NY 10474 On or about 1/7/13, a) The mesh guard for the baler had openings large enough to allow the operator to reach in and get caught by the machine during its operating cycle.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.303 G02 I
- Issued
- Jan 31, 2013
- Abate by
- Feb 12, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): Location: 900 Edgewater Rd Bronx, NY 10474 On or about 1/7/13, a) A circuit breaker panel was missing the front cover and door. Live parts were exposed.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.305 B01 II
- Issued
- Jan 31, 2013
- Abate by
- Feb 12, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: Location: 900 Edgewater Rd Bronx, NY 10474 On or about 1/7/13, a) There were several unused openings in a circuit breaker panel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 F02
- Issued
- Jan 31, 2013
- Abate by
- Feb 12, 2013
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: Location: 900 Edgewater Rd Bronx, NY 10474 On or about 1/7/13, a) Two circuit breaker panels did not have all their circuit breakers marked.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1910.304 F01 IV
- Issued
- Jan 31, 2013
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.304(f)(1)(iv): Overcurrent devices for circuits rated 600 volts, nominal, or less, were not readily accessible to each employee or authorized building management personnel: Location: 900 Edgewater Rd Bronx, NY 10474 On or about 1/7/13, a) A dumpster and a large container were blocking access to a circuit breaker panel.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
More inspections at Sal'S Metal Corp.
View Sal'S Metal Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 423930)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338178817.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.