Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SALDANA FRAMING LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SALDANA FRAMING LLC in 1275 GALLATIN WAY, SUWANEE, GA 30024 (NAICS 238130). OSHA activity number 338212814.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Saldana Framing LLC — free Get an email when a new federal OSHA severe-injury report for Saldana Framing LLC is published. One employer, no account, unsubscribe in one click.
Establishment
SALDANA FRAMING LLC
Site address
1275 GALLATIN WAY
City
SUWANEE
State
GA
ZIP
30024
Mailing
4508 LAKE IVANHOE DRIVE, TUCKER, GA 30084
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
6
Ownership type
A

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 1 1 instance 3 exposed
Issued
Mar 25, 2013
Abate by
Apr 18, 2013
Penalty
Initial $1,200 · Current $720 Reduced
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents.    On or about January 8, 2013, at 1275 Gallatin Way, Suwanee, Georgia:    Three employees framing a house were exposed to struck-by hazards nails and wood debris while using pneumatic nail guns without eye protection.
Recent events (2)
  • — I (S) $720
  • — Z (S) $1200

1926.501 B13

Serious Gravity 5 4 instances 6 exposed
Issued
Mar 25, 2013
Penalty
Initial $2,000 · Current $1,200 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):    On or about January 8, 2013, at 1275 Gallatin Way, Suwanee, Georgia:    a) Two employees framing a house were exposed to a fall hazard of approximately 9-feet to greater than 25-feet when they stood on top of the trusses while working without using fall protection.     b) Two employees framing a house were exposed to a fall hazard of approximately 10.4-feet to 19.4 feet when they worked near the unprotected sides/edge of the second floor.     c) One employee framing a house was exposed to a fall hazard of approxmately 21.8-feet when he scaled the frame of the house and worked while standing on an unfinished window ledge without using fall protection.     d) Six employees framing a house were exposed to a fall hazard of approximately 9-feet when they worked nearr an unguarded floor opening from the first floor to the basement.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2000

1926.503 A02

Serious Gravity 5 1 instance 6 exposed
Issued
Mar 25, 2013
Abate by
Apr 27, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(2): The employer did not assure that each employee exposed to fall hazards was trained by a competent person qualified in the areas specified in 29 CFR 1926.503 (a)(2)(i) through (viii)    On or about January 8, 2013, at 1275 Gallatin Way, Suwanee, Georgia:    Six employees were exposed to fall hazards approximately greater than 25-feet when they were not trained how to recognize and minimize fall hazards on the jobsite.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1053 B01

Serious Gravity 5 1 instance 4 exposed
Issued
Mar 25, 2013
Abate by
Apr 18, 2013
Penalty
Initial $1,600 · Current $960 Reduced
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:    On or about January 8, 2013, at 1275 Gallatin Way, Suwanee, Georgia:    Four employees performing framing work were exposed to a fall hazard of approximately 10.4-feet when they used a metal ladder from the first floor to the second floor landing that did not extend three feet above the landing.
Recent events (2)
  • — I (S) $960
  • — Z (S) $1600

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338212814.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.