ITHACA, NY —
OSHA Inspection: GARRISON CONSTRUCTION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GARRISON CONSTRUCTION in 100 RACHEL CARSON WAY TURQUOISE #8, ITHACA, NY 14850 (NAICS 236115). OSHA activity number 338233646.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GARRISON CONSTRUCTION
- Site address
- 100 RACHEL CARSON WAY TURQUOISE #8
- City
- ITHACA
- State
- NY
- ZIP
- 14850
- Mailing
- 35 MAPLEWOOD ROAD, ITHACA, NY 14850
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236115
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.501 B13
- Issued
- Feb 15, 2013
- Abate by
- Feb 28, 2013
- Penalty
- Initial $2,800 · Current $500 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) 100 Rachel Carson Way Turquois #8 - On or about 4 January, 2013 - Employees were installing framing material on the roof of a two story building without the use of personal fall protection.
Recent events (3)
- — J (S) $500
- — C (S) $2800
- — Z (S) $2800
1926.304 H01
- Issued
- Feb 15, 2013
- Abate by
- Feb 28, 2013
- Penalty
- Initial $2,800 · Current $500 Reduced
General-duty citation text
29 CFR 1926.304(h)(1): Each circular crosscut table saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut: a) 100 Rachel Carson Way Turquois #8 - On or about 4 January, 2013 - Employees were using a table saw that was not guarded by a hood.
Recent events (3)
- — J (S) $500
- — C (S) $2800
- — Z (S) $2800
1926.304 F
- Issued
- Feb 15, 2013
- Abate by
- Feb 28, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws were not equipped with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) 100 Rachel Carson Way Turquois #8 - On or about 4 January, 2013 - Employees were using a table saw that was not equipped with a spreader to prevent material from squeezing the saw or being thrown back on the operator.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1926.304 F
- Issued
- Feb 15, 2013
- Abate by
- Feb 28, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws did not have non-kickback fingers on dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) 100 Rachel Carson Way Turquois #8 - On or about 4 January, 2013 - Employees were using a table saw that did not have non-kickback fingers on dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1926.1053 B04
- Issued
- Feb 15, 2013
- Abate by
- Feb 28, 2013
- Penalty
- Initial $1,200 · Current $500 Reduced
General-duty citation text
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed: a) 100 Rachel Carson Way Turquois #8 - On or about 4 January, 2013 - Employees were installing framing on the second floor working from scaffold that was supported by two step ladders.
Recent events (3)
- — J (S) $500
- — C (S) $1200
- — Z (S) $1200
More inspections at Garrison Construction
View Garrison Construction's full OSHA safety record →
More inspections in this industry (NAICS 236115)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338233646.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.