MILLVILLE, NJ —
OSHA Inspection: CARLISLE MACHINE WORKS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CARLISLE MACHINE WORKS, INC. in 412 S. WADE, MILLVILLE, NJ 08332 (NAICS 332710). OSHA activity number 338308216.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CARLISLE MACHINE WORKS, INC.
- Site address
- 412 S. WADE
- City
- MILLVILLE
- State
- NJ
- ZIP
- 08332
- Mailing
- P.O. BOX 746, MILLVILLE, NJ 08332
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 19
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Feb 13, 2013
- Abate by
- Mar 12, 2013
- Penalty
- Initial $1,700 · Current $1,020 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to an amputation hazard while operating a hyudraulic press brake. a) Machine Shop - The employer did not develop and implement a written safe distance program for the protection of press brake operators. On or about 01/22/2013.
Recent events (2)
- — I (S) $1020
- — Z (S) $1700
1910.147 C01
- Issued
- Feb 13, 2013
- Abate by
- Mar 12, 2013
- Penalty
- Initial $1,020 · Current $612 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: a) 412 S. Wade Blvd., Millville, NJ 08332 - The employer did not develop and implement a written lockout tagout program. On or about 01/22/2012.
Recent events (2)
- — I (S) $612
- — Z (S) $1020
1910.151 C
- Issued
- Feb 13, 2013
- Abate by
- Mar 12, 2013
- Penalty
- Initial $1,700 · Current $1,020 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) Parts Washroom - A suitable eyewash was not provided in an area where H&M Scale remover, a corrosive liquid, was used. On or about 01/22/2013.
Recent events (2)
- — I (S) $1020
- — Z (S) $1700
1910.178 L04 III
- Issued
- Feb 13, 2013
- Abate by
- Mar 12, 2013
- Penalty
- Initial $1,360 · Current $816 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) 412 S. Wade Blvd., Millville, NJ 08332 - An evaluation of each fork truck operator's ability to safely operate the vehicle was not conducted within the previous 3 years. On or about 01/22/2013.
Recent events (2)
- — I (S) $816
- — Z (S) $1360
More inspections at Carlisle Machine Works, INC.
View Carlisle Machine Works, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338308216.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.