HOLLY HILL, FL —
OSHA Inspection: COMPLETE CUSTOM WHEEL, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of COMPLETE CUSTOM WHEEL, INC. in 618 RIDGEWOOD AVE., HOLLY HILL, FL 32117 (NAICS 336399). OSHA activity number 338460637.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COMPLETE CUSTOM WHEEL, INC.
- Site address
- 618 RIDGEWOOD AVE.
- City
- HOLLY HILL
- State
- FL
- ZIP
- 32117
- Mailing
- 618 RIDGEWOOD AVE., HOLLY HILL, FL 32117
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336399
- Employees
- 21
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A03 II
- Issued
- May 3, 2013
- Abate by
- May 3, 2013
- Penalty
- Initial $1,360 · Current $850 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle: a. On or about January 24, 2013, in the shop, the bit on the drill press was not guarded, exposing employees to flying parts. Abatement Certification and Documentation are required
Recent events (2)
- — I (S) $850
- — Z (S) $1360
1910.212 B
- Issued
- May 3, 2013
- Abate by
- May 9, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a. On or about January 24, 2013, in the shop, the drill press was not anchored to prevent walking or moving, exposing the employee to crushing hazards. Abatement Certification and Documentation are required
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A04
- Issued
- May 3, 2013
- Abate by
- May 9, 2013
- Penalty
- Initial $1,360 · Current $850 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: a. On or about January 24, 2013, in the shop, the bench grinder did not have a work rest, exposing employees to flying particles. Abatement Certification and Documentation are required
Recent events (2)
- — I (S) $850
- — Z (S) $1360
1910.215 B09
- Issued
- May 3, 2013
- Abate by
- May 9, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a. On or about January 24, 2013, in the shop, the distance between the wheel and tongue guard was a 1/2 inch. Abatement Certification and Documentation are required
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 336399)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338460637.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.