FOREST, MS —
OSHA Inspection: JACK BATTE & SONS
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of JACK BATTE & SONS in 221 SCR 35-9, FOREST, MS 39074 (NAICS 321113). OSHA activity number 338467632.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JACK BATTE & SONS
- Site address
- 221 SCR 35-9
- City
- FOREST
- State
- MS
- ZIP
- 39074
- Mailing
- 221 SCR 35-9, FOREST, MS 39074
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 65
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.141 D02 II
- Issued
- Mar 6, 2013
- Penalty
- Initial $1,339 · Current $803 Reduced
General-duty citation text
29 CFR 1910.141(d)(2)(ii): Lavatories were not provided with hot and cold, or tepid running water. (a) Chip-n-Saw Tool Parts Room - On or about January 18, 2013 that bathroom did not have hot or tepid water.
Recent events (2)
- — I (S) $803.4
- — Z (S) $1339
1910.141 D02 III
- Issued
- Mar 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.141(d)(2)(iii): Lavatories were not provided with hand soap or similar cleansing agent. (a) Chip-n-Saw Tool Parts Room - On or about January 18, 2013 the bathroom did not have hand soap or similar cleansing agents.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.141 D02 IV
- Issued
- Mar 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.141(d)(2)(iv): Lavatories were not provided with individual hand towels or sections thereof, of cloth or paper, warm air blowers or clean individual sections of continuous cloth toweling. (a) Chip-n-Saw Tool Parts Room - On or about January 18, 2013 the bathroom did not have individual hand towels. cloth or paper or a warm air blower.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 C02 I
- Issued
- Mar 6, 2013
- Penalty
- Initial $1,785 · Current $1,071 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting. (a) Chip-n-Saw - On or about January 18, 2013 the rotating drive shaft was not guarded.
Recent events (2)
- — I (S) $1071
- — Z (S) $1785
1910.305 B02 I
- Issued
- Mar 6, 2013
- Penalty
- Initial $2,231 · Current $1,339 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy. (a) Chip-n-Saw Tool Parts Room - On or about January 18, 2013 the junction box at the Lennox A/C unit lacked a cover. (b) Cut-Off Saw Cab - On or about January 18, 2013 faceplate was missing from eletrical outlet box behind the operator. (c) Trim Saw - On or about January 18, 2013 the faceplate was missing from the electrical outlet box at the micro-wave oven.
Recent events (2)
- — I (S) $1338.6
- — Z (S) $2231
1910.305 G01 IV
- Issued
- Mar 6, 2013
- Penalty
- Initial $1,339 · Current $803 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv): Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv). (a) Time Clock - On about January 18, 2013 an extension cord was used a substitute for fixed wiring and it ran through wall opening to the time clock.
Recent events (2)
- — I (S) $803.4
- — Z (S) $1339
More inspections in this industry (NAICS 321113)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338467632.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.