OSHA Inspection: BRAND X EQUIPMENT, LLC

Issued

2013-02-04 00:00:00

Penalty

Initial $1200.00 · Current $840.00 Reduced

General-duty citation text

29 CFR 1910.37(a)(2):     Exit routes were arranged so that employees would have to travel toward a high hazard area:    (a) Shop Area: On 01/22/13 and at times prior thereto, four fuel containers with residual amounts of fuel and one approximately half full were stored along the route to the southeast exit door.    NOTE: Abatement certification IS NOT required for this item.

Issued

2013-02-04 00:00:00

Abate by

2013-03-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.303(f)(2):     Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:    (a) Retail/Showroom area: on 1/22/13 and at times prior thereto, the indexes for two circuit panels were not accurate and/or complete.    NOTE: Abatement certification IS required for this item.

Issued

2013-02-04 00:00:00

Abate by

2013-03-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(b)(1)(ii):     Unused openings in boxes, cabinets, or fittings were not effectively closed:    (a) Retail/Showroom Area: On 1/22/13 and at times prior thereto, on side-by-side panels, the right panel did not have a circuit breaker or cover installed at position 11.    NOTE: Abatement certification IS required for this item.

Issued

2013-02-04 00:00:00

Abate by

2013-03-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:    (a) Storage Room: on 1/22/13 and at times prior thereto, two outlet boxes were missing covers.    NOTE: Abatement certification IS required for this item.