LANCASTER, NY —
OSHA Inspection: SEIBEL MODERN MFG. & WELDING CORP.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SEIBEL MODERN MFG. & WELDING CORP. in 38 PALMER PLACE, LANCASTER, NY 14086 (NAICS 332312). OSHA activity number 338575236.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SEIBEL MODERN MFG. & WELDING CORP.
- Site address
- 38 PALMER PLACE
- City
- LANCASTER
- State
- NY
- ZIP
- 14086
- Mailing
- 38 PALMER PLACE, LANCASTER, NY 14086
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 66
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 13, 2013
- Abate by
- Mar 16, 2013
- Penalty
- Initial $2,975 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about 01/30/13, in the production/presses areas, a Lockout/Tagout procedure was not utilized when changing dies on mechanical power press Niagara E-110. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2000
- — Z (S) $2975
1910.151 C
- Issued
- Feb 13, 2013
- Abate by
- Mar 16, 2013
- Penalty
- Initial $2,380 · Current $0 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) On or about 01/30/13, in the battery charging area, there was not an emergency eye wash immediately available for employees refilling water on a Daewoo forklift truck's battery. This battery contained corrosive acid. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $2380
1910.179 L03 I
- Issued
- Feb 13, 2013
- Abate by
- Mar 16, 2013
- Penalty
- Initial $2,380 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.179(l)(3)(i): Unsafe condition(s) disclosed during the frequent or periodic inspection(s) required by 29 CFR 1910.179(j) were not corrected before operation of the crane(s) was resumed: a) On or about 01/30/13, in the Bay 9 South area, a 5 ton overhead crane did not have a safety latch on the hook as indicated by Simmers Crane Design & Services Company's Crane Inspection Report dated July, 2012. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2000
- — Z (S) $2380
1910.212 A01
- Issued
- Feb 13, 2013
- Abate by
- Feb 14, 2013
- Penalty
- Initial $2,529 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by the saw blade: a) On or about 01/30/13, in the saw area/Bay 10, a DoAll Horizontal Band Saw, Model C-410A did not have a guard to cover one side of the non-working part of the blade. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $2529
1910.215 B09
- Issued
- Feb 13, 2013
- Abate by
- Mar 16, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) On or about 01/30/13, in Bay 10 & Grinding room#2, two bench grinders' tongues guards were adjusted to 3/8 inch. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Seibel Modern MFG. & Welding Corp.
View Seibel Modern MFG. & Welding Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338575236.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.