GAINESVILLE, FL —
OSHA Inspection: AKIRA WOOD, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AKIRA WOOD, INC. in 619 S MAIN STREET SUITE A, GAINESVILLE, FL 32601 (NAICS 321918). OSHA activity number 338618234.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AKIRA WOOD, INC.
- Site address
- 619 S MAIN STREET SUITE A
- City
- GAINESVILLE
- State
- FL
- ZIP
- 32601
- Mailing
- P.O. BOX 321, GAINESVILLE, FL 32602
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 21
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.147 C01
- Issued
- May 3, 2013
- Abate by
- Jun 20, 2013
- Penalty
- Initial $4,900 · Current $2,940 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: a. On or about January 29, 2013, the employer did not have a lockout tagout program that consisted of an energy control procedure and periodic inspections for such as but not limited to: the large sander, the edge bander and dust collector. Abatement Certification and Documentation are required
Recent events (2)
- — I (S) $2940
- — Z (S) $4900
1910.147 C06 I
- Issued
- May 3, 2013
- Abate by
- Jun 20, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a. On or about January 29, 2013, the employer did not conduct an annual review of the energy control plan. Abatement Certification and Documentation are required
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- May 3, 2013
- Abate by
- May 15, 2013
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a. On or about January 29, 2013, the drill bit on the press did not have a guard. Abatement Certification and Documentation are required
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.242 B
- Issued
- May 3, 2013
- Abate by
- May 13, 2013
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a. On or about January 29, 2013, employees using compressed air for cleaning purposes did not reduce the air to less than 30 p.s.i. Abatement Certification and Documentation are required
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.107 B09
- Issued
- May 3, 2013
- Abate by
- May 13, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(b)(9): A clear space of not less than 3 feet on all sides was not kept free from storage or combustible construction: a. On or about January 29, 2013, filters and excess paint were stored inside the spray booth, exposing employees to a fire hazard. Abatement Certification and Documentation are required
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 C
- Issued
- May 3, 2013
- Abate by
- Jun 20, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c): The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use: a. On or about January 29, 2013, the employer did not have a written respiratory program for all employees required to wear a respirator when spray painting and sanding operations. Abatement Certification and Documentation are required
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 G01 I A
- Issued
- May 3, 2013
- Abate by
- May 13, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function: a. On or about January 29, 2013, the employee wearing a 3M half-face respirator while spray painting in the spray booth had facial hair. Abatement Certification and Documentation are required
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 L04 III
- Issued
- May 3, 2013
- Abate by
- May 30, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a. On or about January 29, 2013, the employer did not evaluate each forklift operator's performance since 2003. Abatement Certification and Documentation are required
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Akira Wood, INC.
View Akira Wood, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338618234.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.