MIAMI, FL —
OSHA Inspection: SNAPP INDUSTRIES, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SNAPP INDUSTRIES, INC. in 8911 COLLINS AVE, MIAMI, FL 33154 (NAICS 238110). OSHA activity number 338637036.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SNAPP INDUSTRIES, INC.
- Site address
- 8911 COLLINS AVE
- City
- MIAMI
- State
- FL
- ZIP
- 33154
- Mailing
- 2902 NW 22ND STREET, MIAMI, FL 33142
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238110
- Employees
- 1
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.303 B01
- Issued
- Mar 15, 2013
- Abate by
- Mar 21, 2013
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of American National Standards Institute, B7.1-1970, Safety Code for the Use, Care and Protection of Abrasive Wheels, and paragraph (d) of this section: On or about 02/12/13, at the above referenced job site - east side of the building, an employee was working with a grinder without the safety guard.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1926.404 B01 III C
- Issued
- Mar 15, 2013
- Abate by
- Mar 21, 2013
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1926.404(b)(1)(iii)(C): Under the assured equipment grounding conductor program, employer did not ensure that each cord set, attachment cap, plug and receptacle of cord sets, and any equipment connected by cord and plug, except cord sets and receptacles which are fixed and not exposed to damage, was visually inspected before each day's use for external defects, such as deformed or missing pins or insulation damage, and for indications of possible internal damage and that damaged or defective equipment was not used until repaired: a) On or about 02/12/13, at the above referenced site, an employee was observed using an extension cord without the ground pin. b) On or about 02/12/13, at the above referenced site, an extension cord that was observed in use was connected to a receptacle without ground-fault circuit interrupter (GFCI).
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1926.404 B01 III
- Issued
- Mar 15, 2013
- Abate by
- Apr 10, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(b)(1)(iii): Where ground-fault circuit interrupters were not utilized, employer did not establish and implement an assured equipment grounding conductor program on construction site covering all cord sets, receptacles which are not part of the building or structure, and equipment connected by cord and plug which are available for use or used by employees: On or about 02 /12/13 at the above referenced site, the employer did not establish and implement an Assured Equipment Grounding Conductor Program.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Snapp Industries, INC.
View Snapp Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238110)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338637036.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.