Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FIBERGUIDE INDUSTRIES INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of FIBERGUIDE INDUSTRIES INC. in 1 BAY ST., STIRLING, NJ 07980 (NAICS 334417). OSHA activity number 338699440.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Fiberguide Industries INC. — free Get an email when a new federal OSHA severe-injury report for Fiberguide Industries INC. is published. One employer, no account, unsubscribe in one click.
Site address
1 BAY ST.
City
STIRLING
State
NJ
ZIP
07980
Mailing
1 BAY ST., STIRLING, NJ 07980
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
334417
Employees
18
Ownership type
A

8 citations on file for this inspection.

1910.23 C01

Serious Gravity 5 1 instance 8 exposed
Issued
Mar 11, 2013
Abate by
Apr 11, 2013
Penalty
Initial $3,500 · Current $3,500
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) :    a) Tower C, B, D Genie    Employees accessed Towers by use of Genie work platform at 15ft heights without intermediate rails.    Violation occurred on or about 2/5/13.
Recent events (1)
  • — Z (S) $3500

1910.212 A01

Serious Gravity 5 1 instance 8 exposed
Issued
Mar 11, 2013
Abate by
Apr 11, 2013
Penalty
Initial $3,500 · Current $3,500
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation and rotating parts:    a) Lathe workshop    Employees operate lathe without guarding the rotating chuck or jets.    Violation occurred on or about 2/5/2013.
Recent events (1)
  • — Z (S) $3500

1910.305 G01 IV A

Serious Gravity 1 1 instance 8 exposed
Issued
Mar 11, 2013
Abate by
Apr 11, 2013
Penalty
Initial $2,100 · Current $2,100
29 CFR 1910.305(g)(1)(iv)(A): As a substitute for the fixed wiring of a structure;    a) production areas  Flexible extension cords were used to power Tower B, C, & D equipment.  Violation occurred on or about 2/7/2013.
Recent events (1)
  • — Z (S) $2100

1910.305 G01 IV B

Serious Gravity 1 1 instance 8 exposed
Issued
Mar 11, 2013
Abate by
Apr 11, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv) - through holes in walls:    a) Tower D area  Flexible cord ran through a hole in the wall to allow for a chiller to be plugged to an outlet near Tower D.  Violation occurred on or about 2/7/2013.
Recent events (1)
  • — Z (S) $0

1910.305 G01 IV D

Serious Gravity 1 1 instance 8 exposed
Issued
Mar 11, 2013
Abate by
Apr 11, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(D) : Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv) by being attached to building surfaces:    a) Production area    Flexible extension cords were wrapped around or zip-tied to building structures.    Violation occurred on or about 2/7/2013.
Recent events (1)
  • — Z (S) $0

1910.1200 E01

Serious Gravity 5 1 instance 8 exposed
Issued
Mar 11, 2013
Abate by
Apr 11, 2013
Penalty
Initial $2,800 · Current $2,800
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    a) Production areas    Employees worked with hazardous materials including but not limited to hexane and acetone without an implemented written hazard communication program.    Violation occurred on or about 2/7/2013.
Recent events (2)
  • — I (S) $2800
  • — Z (S) $2800

1910.1200 H01

Serious Gravity 5 1 instance 8 exposed
Issued
Mar 11, 2013
Abate by
Apr 11, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    a) Production area     Employees worked with hazardous materials including but not limited to hexane and acetone without receiving hazard communication training.    Violation occurred on or about 2/7/2013.
Recent events (1)
  • — Z (S) $0

1904.32 A04

Other-than-serious 1 instance 18 exposed
Issued
Mar 11, 2013
Abate by
Mar 28, 2013
Penalty
Initial $700 · Current $700
29 CFR 1904.32(a)(4): The employer did not post an OSHA 300A Form or equivalent by February 1 thru April 30.    a) establishment    The employer failed to post the annual summary of work-related injuries and illnesses.    Violation occurred on or about 2/7/2013.
Recent events (1)
  • — Z (O) $700

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338699440.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.