GALESVILLE, WI —
OSHA Inspection: INDUSTRIAL TOOLCRAFTERS INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of INDUSTRIAL TOOLCRAFTERS INC. in 16771 S 15TH STREET, GALESVILLE, WI 54630 (NAICS 333514). OSHA activity number 338753635.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INDUSTRIAL TOOLCRAFTERS INC.
- Site address
- 16771 S 15TH STREET
- City
- GALESVILLE
- State
- WI
- ZIP
- 54630
- Mailing
- 16771 S 15TH STREET, GALESVILLE, WI 54630
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333514
- Employees
- 11
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 II
- Issued
- Mar 29, 2013
- Abate by
- Apr 26, 2013
- Penalty
- Initial $1,700 · Current $850 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D)(h): a) Within the facility; The energy control procedures were not machine specific in identifying energy sources, placement of lock and specific verification steps for equipment such as but not limited to, the HAAS VF-2, the Matsuura MC-760, and the Okuma Howa 5VA.
Recent events (2)
- — I (S) $850
- — Z (S) $1700
1910.147 C06 I
- Issued
- Mar 29, 2013
- Abate by
- Apr 24, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Within the facility; The employer did not conduct periodic audits of the energy control procedures to ensure that the procedures were proper.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Mar 29, 2013
- Abate by
- Apr 24, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: a) Within the facility; The employer did not provide energy control training to the employees that were performing lockout tagout functions.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L01 I
- Issued
- Mar 29, 2013
- Abate by
- Apr 26, 2013
- Penalty
- Initial $1,360 · Current $680 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) In the facility; The employer did not ensure that the employees completed a combination of formal instruction and practical training and evaluation prior to the employees operating the Hyundai 25C powered industrial vehicle.
Recent events (2)
- — I (S) $680
- — Z (S) $1360
1910.178 Q07
- Issued
- Mar 29, 2013
- Abate by
- Apr 24, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: a) In the facility; The employer did not ensure that the employees were inspecting the Hyundai 25C powered industrial vehicles prior to use.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Industrial Toolcrafters INC.
View Industrial Toolcrafters INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333514)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338753635.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.