GRANVILLE, NY —
OSHA Inspection: TELESCOPE CASUAL FURNITURE, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of TELESCOPE CASUAL FURNITURE, INC. in 82 CHURCH STREET, GRANVILLE, NY 12832 (NAICS 337124). OSHA activity number 338770563.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TELESCOPE CASUAL FURNITURE, INC.
- Site address
- 82 CHURCH STREET
- City
- GRANVILLE
- State
- NY
- ZIP
- 12832
- Mailing
- 82 CHURCH ST., GRANVILLE, NY 12832
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337124
- Employees
- 239
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Jun 3, 2013
- Abate by
- Jun 3, 2013
- Penalty
- Initial $3,600 · Current $2,700 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Metal Department- On or about 2/06/13- Doucette no. 1 machine, two fluted drill bits were not fully guarded exposing employees hazard of flying chips and/being caught in the rotating bit(s). b) Metal Department- On or about 2/06/13- Doucette no. 1 machine, two-hand control was not affixed to the floor at an adequate safe distance from the machine, exposing employees to a pinch-point hazard during machine operation.
Recent events (2)
- — I (S) $2700
- — Z (S) $3600
1910.157 C01
- Issued
- Jun 3, 2013
- Abate by
- Jun 13, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: a) Pellet Mill- On or about 02/06/13- CO2 fire extinguisher was blocked and not identified with labeling. b) Pellet Mill behind hopper- On or about 02/06/13- Badger ABD fire extinguisher was located behind a hopper and not identified with labeling.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 E03
- Issued
- Jun 3, 2013
- Abate by
- Jun 13, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: a) Pellet Mill- On or about 02/06/13- CO2 fire extinguisher had not been inspected since 2/2006.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 F02
- Issued
- Jun 3, 2013
- Abate by
- Jun 13, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(f)(2): Portable fire extinguishers were not hydrostatically tested within the intervals specified in Table L1: a) Pellet Mill- on or about 02/06/2013- CO2 fire extinguisher last inspected on 02/2006 had not been hydrostatically tested within five years.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Telescope Casual Furniture, INC.
View Telescope Casual Furniture, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337124)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338770563.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.