OWENSBORO, KY ·
OSHA Inspection: YAGER MARINE INDUSTRIES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of YAGER MARINE INDUSTRIES, INC. in 5001 HWY 60 E, OWENSBORO, KY 42302 (NAICS 336611). OSHA activity number 338817638.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- YAGER MARINE INDUSTRIES, INC.
- Site address
- 5001 HWY 60 E
- City
- OWENSBORO
- State
- KY
- ZIP
- 42302
- Mailing
- P.O. BOX 2000, OWENSBORO, KY 42302
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (A)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336611
- Employees
- 25
- Ownership type
- Private (A)
Citations
7 citations on file for this inspection.
1910.26 C01
- Issued
- Aug 8, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $2,066 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.26(c)(1): Good safe practices in the use and care of ladder equipment were not employed by the users to get maximum serviceability, safety, and to eliminate unnecessary damage of equipment: Fabrication Shop - On or about 2/11/13, employees were exposed to struck-by and fall hazards when using step ladders as a stretch ladder while welding on barge and accessing barges. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $1500
- · Z (S) $2066
1910.215 B09
- Issued
- Aug 8, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch. a) Fabrication Shop - On or about 2/11/13, employees were exposed by struck-by hazards when tongue guard on bench grinder was not adjusted correctly on both sides of grinder. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.305 A02 X
- Issued
- Aug 8, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(a)(2)(x): Flexible cords and cables were not protected from accidental damage, as might be caused, for example, by sharp corners, projections, and doorways or other pinch points. a) Fabrication Shop - On or about 2/11/13, employees were exposed to shock hazards when extension cords were damaged. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.305 B01 II
- Issued
- Aug 8, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed. a. Fabrication Shop - On or about 2/11/13, employees were exposed to shock hazards when openings in the electrical cutout boxes were not closed. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (4)
- · I $6750
- · Z $9000
- · I (O) $0
1910.305 B02 I
- Issued
- Aug 8, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose. a. Fabrication Shop - On or about 2/11/13, employees were exposed to shock hazards when openings in the electrical junction boxes did not have covers. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (4)
- · I $6750
- · Z $9000
- · I (O) $0
1910.305 G02 III
- Issued
- Aug 8, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws. a) Fabrication Shop - On or about 2/11/13, employees were exposed to shock hazards when extension cord was missing strain relief. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (O) $0
- · Z (O) $0
1915.111 A
- Issued
- Aug 8, 2013
- Abate by
- Sep 4, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1915.111(a): All gear and equipment provided by The employer for rigging and materials handling was not inspected before each shift and When necessary, at intervals during its use to ensure that it is safe. a). Fabrication Shop - On or about 2/11/12, employees were exposed to struck-by hazards when rigging sling was damaged. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Yager Marine Industries, INC.
View Yager Marine Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336611)
More inspections in KY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 338817638.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.