PECOS, TX ·
OSHA Inspection: B & L CASING SERVICES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of B & L CASING SERVICES in RIG 107, LOCKER STATE LEASE, WELL NO. 1H 23.6 MILES S. OF PECOS, PECOS, TX 79772 (NAICS 541990). OSHA activity number 338909005.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- B & L CASING SERVICES
- Site address
- RIG 107, LOCKER STATE LEASE, WELL NO. 1H 23.6 MILES S. OF PECOS
- City
- PECOS
- State
- TX
- ZIP
- 79772
- Mailing
- 9100 MING AVE. SUITE 201 P.O. BOX 2260, BAKERSFIELD, CA 93311
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 541990
- Employees
- 5
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.23 C01
- Issued
- Mar 27, 2013
- Abate by
- Apr 2, 2013
- Penalty
- Initial $2,550 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent): On or about February 11, 2013, two employees operating a laydown double line machine were standing at the edge of a runway platform that was not guarded with standard railings (or equivalent). The employees were exposed to a fall hazard of approximately 4-feet 5-inches to the ground.
Recent events (2)
- · I (S) $2000
- · Z (S) $2550
1910.23 D01 III
- Issued
- Mar 27, 2013
- Abate by
- Apr 2, 2013
- Penalty
- Initial $2,550 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.23(d)(1)(iii): Stairway(s) less than 44 inches wide having both sides open, did not have one stair railing on each side: On or about February 11, 2013, the stairway (24-inches wide) leading up to the runway platform did not have stair railing on the left side. Employees were exposed to a fall hazard of as much as 4-feet 5-inches to the ground.
Recent events (2)
- · I (O) $1500
- · Z (S) $2550
1910.23 E01
- Issued
- Mar 27, 2013
- Abate by
- Apr 2, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.23(e)(1): Standard railing(s) did not consist of top rail, intermediate rail and/or posts and/or did not have a vertical height of 42 inches (106.7 cm) nominal from upper surface of top rail to floor, platform runway, or ramp level: On or about February 11, 2013, the laydown double line machine's standard railing(s) did not consist of top rail, intermediate rail and/or posts. The employees were exposed to a fall hazard of approximately 4-feet 5-inches to the ground. 1. Guard-rails positioned on the sides and back of the runway platform were missing mid-rails. 2. The stairway leading up to the runway platform did not have a mid-rail on the right side stair rail. Employees were exposed to a fall hazard of as much as 4-feet 5-inches to the ground.
Recent events (2)
- · I (O) $0
- · Z (S) $0
More inspections in this industry (NAICS 541990)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 338909005.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.