STOUGHTON, MA —
OSHA Inspection: MANTUA MANUFACTURING COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MANTUA MANUFACTURING COMPANY in 17 CAMPANELLI PARKWAY, STOUGHTON, MA 02072 (NAICS 331210). OSHA activity number 338911555.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MANTUA MANUFACTURING COMPANY
- Site address
- 17 CAMPANELLI PARKWAY
- City
- STOUGHTON
- State
- MA
- ZIP
- 02072
- Mailing
- PO BOX 464, STOUGHTON, MA 02072
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331210
- Employees
- 9
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.215 A04
- Issued
- Aug 2, 2013
- Abate by
- Sep 23, 2013
- Penalty
- Initial $5,400 · Current $3,780 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: Location: Production Floor Grinding machine did not have work rest to support material. Instance 1) Bench Grinder Model BG-8 Instance 2) Bench Grinder Craftsman 6 inch
Recent events (2)
- — I (S) $3780
- — Z (S) $5400
1910.215 B09
- Issued
- Aug 2, 2013
- Abate by
- Sep 23, 2013
- Penalty
- Initial $5,400 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: Location: Production Floor Tongue guards were not installed on bench grinders. Instance 1) Craftsman 6 inch bench grinder Instance 2) Model BG-8 bench grinder
Recent events (2)
- — I (S) $0
- — Z (S) $5400
1910.217 C01 I
- Issued
- Aug 2, 2013
- Abate by
- Sep 23, 2013
- Penalty
- Initial $6,300 · Current $4,410 Reduced
General-duty citation text
29 CFR 1910.217(c)(1)(i): The employer did not provide and ensure the usage of point of operation guards or properly applied point of operation devices on every operation performed on mechanical power press. Location: Production Area Power Press machine was being operated with no guard in place while an employee's finger was amputated.
Recent events (2)
- — I (S) $4410
- — Z (S) $6300
1910.217 E01 I
- Issued
- Aug 2, 2013
- Abate by
- Sep 23, 2013
- Penalty
- Initial $3,600 · Current $2,520 Reduced
General-duty citation text
29 CFR 1910.217(e)(1)(i): Records of mechanical power press inspections and the maintenance work performed were not maintained: Location: Production Area Records were not maintained on power press machines one of which a employee amputated his finger.
Recent events (2)
- — I (S) $2520
- — Z (S) $3600
1910.217 F02
- Issued
- Aug 2, 2013
- Abate by
- Sep 23, 2013
- Penalty
- Initial $6,300 · Current $4,410 Reduced
General-duty citation text
29 CFR 1910.217(f)(2): Supervision to ensure that correct operating procedures were being followed on mechanical power press(es) was inadequate: Location: Production Area Guards were not in place on power press machine when amputation occured.
Recent events (2)
- — I (S) $4410
- — Z (S) $6300
1910.219 B01
- Issued
- Aug 2, 2013
- Penalty
- Initial $6,300 · Current $4,410 Reduced
General-duty citation text
29 CFR 1910.219(b)(1): Flywheel(s) with parts seven feet or less above floor(s) or platform(s) were not guarded in accordance with the requirements specified in 29 CFR 1910.219(b)(1)(i) through (b)(1)(iv) Location: Production Area Two power press flywheels were not guarded exposing employees to crushing hazards from the flywheel.
Recent events (2)
- — I (S) $4410
- — Z (S) $6300
1910.217 G01
- Issued
- Aug 2, 2013
- Penalty
- Initial $900 · Current $630 Reduced
General-duty citation text
29 CFR 1910.217(g)(1): The employer shall, within 30 days of the occurrence, report to either the Director of the Directorate of Safety Standards Programs, OSHA, U.S. Department of Labor, Washington, D.C. 20210, or the State agency administering a plan approved by the Assistant Secretary of Labor for Occupational Safety and Health, all point of operation injuries to operators or other employees. The following information shall be included in the report: Location: Production Area Employer did not report point of operation injury on mechanical power presses as required.
Recent events (2)
- — I (O) $630
- — Z (O) $900
More inspections at Mantua Manufacturing Company
View Mantua Manufacturing Company's full OSHA safety record →
More inspections in this industry (NAICS 331210)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338911555.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.