Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,192,068Inspections Most recent open 2026-08-04 Last loaded 2026-08-07

OSHA Inspection: GREDE OMAHA LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of GREDE OMAHA LLC in 2614 MARTHA ST, OMAHA, NE 68105 (NAICS 331511). OSHA activity number 338919749.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Grede Omaha LLC for free Get an email when a new federal OSHA severe-injury report for Grede Omaha LLC is published. One employer, no account, unsubscribe in one click.
Establishment
GREDE OMAHA LLC
Site address
2614 MARTHA ST
City
OMAHA
State
NE
ZIP
68105
Mailing
2614 MARTHA ST, OMAHA, NE 68105
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331511
Employees
35
Ownership type
A

4 citations on file for this inspection.

1910.23 E02

Other-than-serious 1 instance 5 exposed
Issued
Jun 10, 2013
Abate by
Sep 30, 2013
Penalty
Initial $5,000 · Current $3,000 Reduced
29 CFR 1910.23(e)(2):     One railing on a stairway(s) less than 44 inches wide did not meet the requirements of this standard:     On the stair way used to access the Sinto pouring deck a stair railing near the open side adjacent to the cupola did not meet the requirements of this standard.    Abatement certification is required for this violation.  The abatement certification sheet is enclosed with citation.
Recent events (2)
  • · I (O) $3000
  • · Z (S) $5000

1910.303 B01 II

Serious Gravity 5 1 instance 30 exposed
Issued
Jun 10, 2013
Abate by
Jul 5, 2013
Penalty
Initial $6,000 · Current $6,000
29 CFR 1910.303(b)(1)(ii):     Electrical equipment was not free from recognized hazards, based on the mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided:    1.In the maintenance area of the facility the employer is failing to ensure that the water fountain was equipped with a protective shroud, exposing employees to live electrical parts.    2.In the melt storage area of the facility the employer is failing to ensure that the cover used to enclose the 220 volt disconnect did not allow for access to open conductors in that the switch was setback from the cover and 1 inch round opening was present in the front of that cover.    Abatement certification is required for this violation.  The abatement certification sheet is enclosed with citation.
Recent events (2)
  • · I (S) $6000
  • · Z (S) $6000

1910.305 B01 II

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jun 10, 2013
Abate by
Jul 5, 2013
Penalty
Initial $4,000 · Current $0 Reduced
29 CFR 1910.305(b)(1)(ii):   Unused openings in boxes, cabinets, or fittings were not effectively closed:   In the melt storage area of the facility the employer is failing to ensure that the cover used to enclose the 220 volt disconnect did not allow for access to open conductors in that the switch was setback from the cover and 1 inch round opening was present in the front of that cover.
Recent events (2)
  • · I (S) $0
  • · Z (S) $4000

1910.303 F02

Deleted Other-than-serious 1 instance 1 exposed
Issued
Jun 10, 2013
Abate by
Jul 5, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.303(f)(2):   Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:  In the maintenance area of the facility the employer is failing to ensure the identity of each breaker within the breaker panel was clearly marked so that the purpose of the individual breaker or the circuit they serve was evident.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338919749.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.