Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: ARMY DIRECTORATE OF PLANS, TRAINING, MOBILIZATION & SECURITY

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ARMY DIRECTORATE OF PLANS, TRAINING, MOBILIZATION & SECURITY in 1010 LEGGETT AVE BOX 339500 MAIL STOP 1AA, JOINT BASE LEWIS MCCHORD, WA 98433 (NAICS 928110). OSHA activity number 338922099.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Army Directorate of Plans, Training, Mobilization & Security for free Get an email when a new federal OSHA severe-injury report for Army Directorate of Plans, Training, Mobilization & Security is published. One employer, no account, unsubscribe in one click.
Site address
1010 LEGGETT AVE BOX 339500 MAIL STOP 1AA
City
JOINT BASE LEWIS MCCHORD
State
WA
ZIP
98433
Mailing
1010 LEGGETT AVE BOX 339500 MAIL STOP 1AA, JOINT BASE LEWIS MCCHORD, WA 98433
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Union (A)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
928110
Employees
191
Ownership type
Federal government (D)

5 citations on file for this inspection.

1910.213 H01

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 15, 2013
Abate by
May 31, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.213(h)(1):  The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material:    (a) Target Maintenance shop bldg. 4036, Dewalt 16 inch radial arm saw.
Recent events (1)
  • · Z (S) $0

1910.213 H04

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 15, 2013
Abate by
May 31, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.213(h)(4):  Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator:    (a) Target Maintenance shop bldg. 4036, Dewalt 16 inch radial arm saw.
Recent events (1)
  • · Z (S) $0

1910.219 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 15, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.219(b)(1): Flywheel(s) with parts seven feet or less above floor(s) or platform(s) were not guarded in accordance with the requirements specified in 29 CFR 1910.219(b)(1)(i) through (b)(1)(iv)    (a)Shredder Bldg.  Flywheel guard on shredder was not in place while machine was opereated.
Recent events (1)
  • · Z (S) $0

1910.242 B

Other-than-serious 1 instance 1 exposed
Issued
Apr 15, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.242(b):  Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:  (a)  Shredder Bldg.  Air used to blow dust and debris off shredders was adjusted to approximately 120 psi and did not have a properly operating safety nozzle.
Recent events (1)
  • · Z (O) $0

1910.303 B02

Other-than-serious 1 instance 9 exposed
Issued
Apr 15, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:    (a) EMS Bldg. 1401 Relocateable Power Tap  rated at 15 amps was used to power two microwave ovens and a hot and cold water dispenser totaling 25.8 amps.
Recent events (1)
  • · Z (O) $0

View Army Directorate of Plans, Training, Mobilization & Security's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 338922099.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.