Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: VIP MASONRY

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of VIP MASONRY in 17018 TURIN RIDGE, SAN ANTONIO, TX 78255 (NAICS 238140). OSHA activity number 338927049.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch VIP Masonry — free Get an email when a new federal OSHA severe-injury report for VIP Masonry is published. One employer, no account, unsubscribe in one click.
Establishment
VIP MASONRY
Site address
17018 TURIN RIDGE
City
SAN ANTONIO
State
TX
ZIP
78255
Mailing
5772 GREYROCK DR., SAN ANTONIO, TX 78228
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
26
Ownership type
A

6 citations on file for this inspection.

1926.102 A01

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Mar 22, 2013
Abate by
Mar 28, 2013
Penalty
Initial $2,100 · Current $0 Reduced
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  On or about March 01, 2013, employee was exposed to being struck in the eyes and face by fragments, from the bricks being cut with the masonry saw, when not using safety glasses and a face shield.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2100

1926.451 C02

Deleted Serious Gravity 1 1 instance 3 exposed
Issued
Mar 22, 2013
Abate by
Mar 28, 2013
Penalty
Initial $2,100 · Current $0 Reduced
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames,  or uprights did not bear on base plates, mud sills or other adequate firm foundation:  On or about March 01, 2013, employees were exposed to falls of up to approximately 9 feet 5 inches in height to the ground level below, while installing brick veneer, to the front wall of the residential home, from a welded frame scaffold which was not provided with base plates or mud sills.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2100

1926.451 C02 II

Deleted Serious Gravity 1 1 instance 3 exposed
Issued
Mar 22, 2013
Abate by
Mar 28, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.451(c)(2)(ii): Unstable objects shall not be used to support scaffolds or platform units:  On or about March 01, 2013, employees were exposed to falls of approximately 9 feet 5 inches in height, to ground level, while installing the brick veneer to the front of the home, while using a welded frame scaffold which had two of the four scaffold frame legs resting on piles of stones.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 E01

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Mar 22, 2013
Abate by
Mar 28, 2013
Penalty
Initial $2,800 · Current $0 Reduced
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface was not used:  On or about March 01, 2013, employees were exposed to falls of up to approximately 12 feet 5 inches in height to the ground level below, while using a welded frame scaffold, which was not provided with a ladder, to access the working platform.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1926.451 G04 I

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Mar 22, 2013
Abate by
Mar 28, 2013
Penalty
Initial $2,800 · Current $0 Reduced
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms:  On or about March 01, 2013, employees were exposed to the hazard of falls of up to approximately 12 feet 6 inches in height, to the ground level below, from a welded frame scaffold which was not provided with a guard rail at the end of the scaffold platform, while installing brick veneer to the wall from a welded frame scaffold.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1926.451 H02 II

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Mar 22, 2013
Abate by
Mar 28, 2013
Penalty
Initial $2,100 · Current $0 Reduced
29 CFR 1926.451(h)(2)(ii): A toeboard was not erected along the edge of platforms more than 10 feet (3.1 m) above lower levels for a distance sufficient to protect employees below:  On or about March 01, 2013, employees were exposed to being struck by bricks, while working below a scaffold platform, which was approximately 12 feet 5 inches in height to ground level, and not having a toeboard, while employees were installing the brick veneer to the home.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2100

View VIP Masonry's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338927049.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.