Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,871Inspections Most recent open 2026-07-30 Last loaded 2026-08-03

OSHA Inspection: TOTAL SUPPORT TOOLING, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of TOTAL SUPPORT TOOLING, INC. in 508 WILHITE ST., FLORENCE, AL 35630 (NAICS 332312). OSHA activity number 338927064.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Total Support Tooling, INC. for free Get an email when a new federal OSHA severe-injury report for Total Support Tooling, INC. is published. One employer, no account, unsubscribe in one click.
Site address
508 WILHITE ST.
City
FLORENCE
State
AL
ZIP
35630
Mailing
508 WILHITE ST., FLORENCE, AL 35630
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
21
Ownership type
A

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 3 instances 1 exposed
Issued
Jun 20, 2013
Abate by
Jul 17, 2013
Penalty
Initial $2,000 · Current $1,200 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees:   (a) On or about 02/28/2013 - Millroom, the safety latch on the hook of the Coffing 1/2 ton crane was missing.     (b) On or about 02/28/2013 - Polishing room, the safety latch on the hook of the Coffing 1/2 ton crane was missing.
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2000

1910.242 B

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 20, 2013
Penalty
Initial $1,360 · Current $816 Reduced
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i:  (a) On or about 02/28/2013 -  compressed air used for cleaning was not reduced to 30 p.s.i.
Recent events (2)
  • · I (S) $816
  • · Z (S) $1360

1910.179 J03

Serious Gravity 5 1 instance 3 exposed
Issued
Jun 20, 2013
Abate by
Aug 7, 2013
Penalty
Initial $2,000 · Current $1,200 Reduced
29 CFR 1910.179(j)(3): Complete inspections of the crane was not being performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section:    (a) On or about 02/28/2013 - periodic inspections had not been performed on the wall crane.
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2000

1910.147 C01

Other-than-serious 1 instance 3 exposed
Issued
Jun 20, 2013
Penalty
Initial $400 · Current $240 Reduced
29 CFR 1910.147(c)(1): Energy control program. The employer did not establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  (a) On or about 02/28/2013 - Millroom, procedures were not developed and documented for equipment requiring lockout/tagout.
Recent events (2)
  • · I (O) $240
  • · Z (O) $400

1910.1200 E01

Other-than-serious 1 instance 1 exposed
Issued
Jun 20, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): Employers did not develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:   (a) On or about 03/21/2013 - Employer did not develop and implemented a written Hazard Communication Program to address use of Chemicals such as, but not limited to Air Tool Lubricant, Simple Green All Purpose Cleaner, StarCool 101JS, Steel Blue Layout Fluid, WD 40, Hydraulic Oil 68, Citco Citgard 600 Engine Oil SAE 30, Citco SlideRite 68 Oil at the facility.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

View Total Support Tooling, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338927064.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.