SAINT LOUIS, MO —
OSHA Inspection: KAISER & JOHNSON EXPORT PACKAGING INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KAISER & JOHNSON EXPORT PACKAGING INC. in 3200 S. KINGSHIGHWAY BLVD, SUITE B, SAINT LOUIS, MO 63139 (NAICS 321920). OSHA activity number 338935943.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KAISER & JOHNSON EXPORT PACKAGING INC.
- Site address
- 3200 S. KINGSHIGHWAY BLVD, SUITE B
- City
- SAINT LOUIS
- State
- MO
- ZIP
- 63139
- Mailing
- 3200 S. KINGSHIGHWAY BLVD, SUITE B, SAINT LOUIS, MO 63139
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 12
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Mar 20, 2013
- Abate by
- May 6, 2013
- Penalty
- Initial $1,700 · Current $1,190 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a. Where saws, both hard wired and cord/plug, compressor, and hand tools were used in the manufacturing of wood packaging, a lockout/tagout program had not been developed and implemented, including requiring lockout of equipment, such as when changing saw blades, documented training, and documented annual inspection (audit) of the program. Abatement documentation is required for this violation.
Recent events (2)
- — I (S) $1190
- — Z (S) $1700
1910.213 D01
- Issued
- Mar 20, 2013
- Abate by
- May 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a. The table saw was used without a guard. Abatement documentation is required for this violation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 C03 I
- Issued
- Mar 20, 2013
- Abate by
- May 6, 2013
- Penalty
- Initial $1,020 · Current $714 Reduced
General-duty citation text
29 CFR 1910.303(c)(3)(i): All splices and joints and the free ends of the conductors were not covered with an insulation equivalent to that of the conductors or with an insulating device identified for the purpose: a. A hand grinder power cord was spliced with a cord that did not match the original equipment, including non-industrial insulation; the splice was not an approved splice (electrical tape). Abatement documentation is required for this violation.
Recent events (2)
- — I (S) $714
- — Z (S) $1020
1910.304 G05
- Issued
- Mar 20, 2013
- Abate by
- May 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: a. Cooling fans were missing ground pins (equipment grounding conductor). Abatement documentation is required for this violation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.334 A02 II
- Issued
- Mar 20, 2013
- Abate by
- May 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service: a. Power cord insulation was damaged on cooling fans. Abatement documentation is required for this violation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Kaiser & Johnson Export Packaging INC.
View Kaiser & Johnson Export Packaging INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321920)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338935943.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.