NAZARETH, PA —
OSHA Inspection: C.F. MARTIN & CO., INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of C.F. MARTIN & CO., INC. in 510 SYCAMORE STREET, NAZARETH, PA 18064 (NAICS 339992). OSHA activity number 338936545.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch C.F. Martin & CO., INC. — free
Get an email when a new federal OSHA severe-injury report for C.F. Martin & CO., INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- C.F. MARTIN & CO., INC.
- Site address
- 510 SYCAMORE STREET
- City
- NAZARETH
- State
- PA
- ZIP
- 18064
- Mailing
- 510 SYCAMORE STREET P.O. BOX 329, NAZARETH, PA 18064
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339992
- Employees
- 525
- Ownership type
- A
Citations
10 citations on file for this inspection.
1910.106 E06 II
- Issued
- Jul 9, 2013
- Abate by
- Jul 22, 2013
- Penalty
- Initial $3,060 · Current $3,060
General-duty citation text
29 CFR 1910.106(e)(6)(ii): Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100°F (37.8 °C), were dispensed into containers without the nozzle and container being electrically interconnected. a) C.F. Martin & CO., Inc. - On or about March 12, 2013, a Category 1 flammable liquid with a flashpoint below 100° F was being dispensed into daily use containers without the nozzle and container being electrically interconnected.
Recent events (2)
- — I (S) $3060
- — Z (S) $3060
1910.212 A03 II
- Issued
- Jul 9, 2013
- Abate by
- Jul 22, 2013
- Penalty
- Initial $3,060 · Current $2,764 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) C.F. Martin & CO., Inc. Tooling & Machinery Area - On or about March 12, 2013, employees were using a Marvel brand, model 712 M Horizontal Band Saw with the blade not being guarded to prevent injuries to employees. b) C.F. Martin & CO., Inc. Tooling & Machinery Area - On or about March 12, 2013, employees were using a Wahlstrom & Co. brand Vertical Band Saw with the blade not completely guarded to prevent injuries to employees. c) C.F. Martin & CO., Inc. Tooling & Machinery Area - On or about March 12, 2013, employees were using a Powermatic band Vertical Band Saw with the blade not completely guarded to prevent injuries to employees. d) C.F. Martin & CO., Inc. Maintenance Shop Area - On or about March 19, 2013, employees were using a Wells brand, Horizontal Band Saw with the blade not being guarded to prevent injuries to employees. e) C.F. Martin & CO., Inc. Maintenance Shop Area - On or about March 19, 2013, employees were using a Wells brand, Horizontal Band Saw with belts and pulleys less than 7 feet from the floor that were not guarded to protect employees from injuries.
Recent events (2)
- — I (S) $2763.5
- — Z (S) $3060
1910.213 D01
- Issued
- Jul 9, 2013
- Abate by
- Jul 22, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) C.F. Martin & CO., Inc. Machine Room - On or about March 19, 2013, employees were using a Saw Stop brand, Professional cabinet circular table saw with the blade not being guarded by an automatically adjusting hood to prevent injuries to employees. b) C.F. Martin & CO., Inc. Guitar Makers Connection - On or about June 4, 2013, employees were using a Saw Stop brand, Professional cabinet circular table saw with the blade not being guarded by an automatically adjusting hood to prevent injuries to employees.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Jul 9, 2013
- Penalty
- Initial $1,951 · Current $1,951
General-duty citation text
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: a) C.F. Martin & CO., Inc. Filling Area - On or about March 12, 2013, employees were using a Baldor brand abrasive wheel machine without the use of adjustable tongue guards.
Recent events (2)
- — I (S) $1951
- — Z (S) $1951
1910.219 D01
- Issued
- Jul 9, 2013
- Abate by
- Jul 22, 2013
- Penalty
- Initial $3,060 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) C.F. Martin & CO., Inc. Maintenance Shop Area - On or about March 19, 2013, employees were using a Wells brand, Horizontal Band Saw with pulleys less than 7 feet from the floor that were not guarded to protect employees from injuries.
Recent events (2)
- — I (S) $0
- — Z (S) $3060
1910.219 E01 I
- Issued
- Jul 9, 2013
- Abate by
- Jul 22, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o):(a) (LOCATION) (IDENTIFY SPECIFIC OPERATION(S) AND/OR CONDITIONS) (DESCRIBE HAZARD(S) WHERE NECESSARY) a) C.F. Martin & CO., Inc. Maintenance Shop Area - On or about March 19, 2013, employees were using a Wells brand, Horizontal Band Saw with horizontal belts which had both runs 42 inches or less from the floor level that were not guarded to protect employees from injuries.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B02
- Issued
- Jul 9, 2013
- Abate by
- Jul 22, 2013
- Penalty
- Initial $2,295 · Current $2,295
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) Custom Shop, C.F. Martin & CO., Inc. - On or about March 7, 2013, re-locatable power taps were series connected (daisy chained) to other re-locatable power taps. b) Custom Shop, C.F. Martin & CO., Inc. - On or about March 7, 2013, a metal knock out type receptacle box was being used as a pendant at a work station and was not permanently mounted.
Recent events (2)
- — I (S) $2295
- — Z (S) $2295
1910.147 C06 I C
- Issued
- Jul 9, 2013
- Abate by
- Jul 22, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i)(C): Where lockout was used for energy control, the periodic inspection did not include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure being inspected. a) C.F. Martin & CO., Inc. - On or about March 12, 2013, the employer did not perform annual periodic inspection to include review of authorized employee's responsibilities under the energy control procedure being inspected.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.212 B
- Issued
- Jul 9, 2013
- Abate by
- Jul 22, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a) Custom Shop, C.F. Martin & CO., Inc. - On or about March 7, 2013, employees were utilizing a Bridgeport brand vertical knee that was not securely anchored to prevent walking or moving.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 F05
- Issued
- Jul 9, 2013
- Abate by
- Jul 22, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained therein: a) C.F. Martin & CO., Inc. - On or about March 12, 2013, two 1 gallon containers of a Category 1 flammable liquid were not labeled, tagged, or marked with the identity and appropriate hazard warnings.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at C.F. Martin & CO., INC.
Jul 24, 2008
NAZARETH, PA
Sep 27, 2006
NAZARETH, PA
Jan 17, 2003
NAZARETH, PA
Jul 8, 1982
New York -Richmond, NY
Mar 1, 1982
New York -Richmond, NY
View C.F. Martin & CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 339992)
Jul 2, 2026
111516 - Codabow International LLC · WINONA, MN
Jun 2, 2026
Remo INC. · VALENCIA, CA
Apr 27, 2026
Gibson Guitar Corporation · BOZEMAN, MT
Mar 18, 2026
Gibson Brands, INC. · NASHVILLE, TN
Feb 26, 2026
Paul Reed Smith Guitars, Limited Partnership · STEVENSVILLE, MD
More inspections in PA
Jul 17, 2026
FOX Tapping INC. · COLUMBIA, PA
Jul 17, 2026
Columbia Water CO · COLUMBIA, PA
Jul 17, 2026
NEW Enterprise Stone & Lime CO., INC. · WILKES BARRE, PA
Jul 16, 2026
Mukhleen Gernaros Pizza LLC DBA Genaro'S Pizzeria and Steaks · PHILADELPHIA, PA
Jul 16, 2026
Center City Construction and Development, LLC · PHILADELPHIA, PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338936545.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.