SCRANTON, PA —
OSHA Inspection: STANDARD IRON WORKS
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of STANDARD IRON WORKS in 990 N. SOUTH ST, SCRANTON, PA 18504 (NAICS 332312). OSHA activity number 338941222.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STANDARD IRON WORKS
- Site address
- 990 N. SOUTH ST
- City
- SCRANTON
- State
- PA
- ZIP
- 18504
- Mailing
- 990 N. SOUTH ST, SCRANTON, PA 18504
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 35
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.242 B
- Issued
- Mar 22, 2013
- Abate by
- Apr 26, 2013
- Penalty
- Initial $1,785 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Main Shop: The air wand, used to blow out metal chips from the drill line, was not equipped with a safety tip to reduce compressed air pressure to less than 30 p.s.i., as observed on or about March 7, 2013. Abatement Certification Required
Recent events (2)
- — I (S) $1500
- — Z (S) $1785
1910.303 G02 I
- Issued
- Mar 22, 2013
- Abate by
- Apr 26, 2013
- Penalty
- Initial $2,380 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): a)Miscellaneous Department: The front cover of the control panel on the Rockwell horizontal bandsaw was damaged exposing the energized conductors to contact, as observed on or about March 7, 2013. Abatement Certification Required.
Recent events (2)
- — I (O) $1000
- — Z (S) $2380
1910.305 B02 I
- Issued
- Mar 22, 2013
- Abate by
- Apr 26, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: a) Miscellaneous Department: An electrical junction box, located on the floor beneath the steel rack, was not equipped with a cover, as observed on or about March 7, 2013. Abatement Certification Required.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.147 C06 I
- Issued
- Mar 22, 2013
- Abate by
- Apr 26, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Maintenance: The employer did not conduct a periodic inspection of the energy control procedures at least annually, on or about March 7, 2013. Abatement Certification Required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C07 I
- Issued
- Mar 22, 2013
- Abate by
- Apr 26, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: a) Maintenance: The employer did not provide adequate training for both authorized and affected employees, on or about March 7, 2013. Abatement Certification Required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Standard Iron Works
View Standard Iron Works's full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338941222.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.