Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: DC RENTALS

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of DC RENTALS in 5 TIPPING DRIVE, BRANFORD, CT 06405 (NAICS 532412). OSHA activity number 338944945.

Watch DC Rentals — free Get an email when a new federal OSHA severe-injury report for DC Rentals is published. One employer, no account, unsubscribe in one click.
Establishment
DC RENTALS
Site address
5 TIPPING DRIVE
City
BRANFORD
State
CT
ZIP
06405
Mailing
5 TIPPING DRIVE, BRANFORD, CT 06405
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
532412
Employees
9
Ownership type
A

7 citations on file for this inspection.

1910.23 C01

Serious Gravity 5 4 instances 3 exposed
Issued
Penalty
Initial $1600.00 · Current $880.00 Reduced
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:     Location: 5 tipping Drive, Branford, CT 06405    a) The 9 foot 6 inch wide, 18 foot 3 inch long open-sided mezzanine storage area with an 8 foot 11 inch high fall distance above the maintenance supervisor's office inside the maintenance garage was not equipped with standard railings.    b) The 6 foot 5 inch long open-sided storage area with an 8 foot 11 inch high fall distance above the bathroom inside the maintenance garage was not equipped with a standard railing.    c) The 6 foot 8 inch high open-sided storage area with an 8 foot 10 inch high fall distance above the parts storage area was not equipped with a standard railing.    d) The 7 foot 4 inch open-sided floor on the south side, 13 foot 1 inch open-sided floor on the east side and 16 foot 10 inch open-sided floor on the north side of the storage area above the oil and fluid storage area with a 10 foot 8 inch high fall distance were not equipped with standard railings.
Recent events (2)
  • — I (S) $880
  • — Z (S) $1600

1910.132 D01

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1200.00 · Current $660.00 Reduced
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE):     Location: 5 Tipping Drive, Branford, CT 06405    A workplace hazard assessment to determine the hazards present, or likely to be present, that would necessitate the need for personal protective equipment (PPE) was not conducted.
Recent events (2)
  • — I (S) $660
  • — Z (S) $1200

1910.132 F01

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.132(f)(1): The employer did not provide training to each employee who is required by this section to use personal protective equipment:  Location: 5 Tipping Drive, Branford, CT 06405  Each employee was not provided with training as to when personal protective equipment was required as per the PPE assessment and the proper use of personal protective equipment.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L01 I

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1100.00 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    Location: 5 Tipping Drive, Branford, CT 06405    Each powered industrial truck operator did not successfully complete a powered industrial truck training program and evaluation for each powered industrial truck used/operated by each operator.
Recent events (2)
  • — I (S) $1100
  • — Z (S) $2000

1910.1200 E01

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1200.00 · Current $660.00 Reduced
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):     Location: 5 Tipping Drive, Branford, CT 06405    A written hazard communications program was not developed and implemented for employees using products and chemicals such as but not limited to diesel fuel, gasoline, brake fluid, antifreeze, and hydraulic fluid.
Recent events (2)
  • — I (S) $660
  • — Z (S) $1200

1910.1200 G08

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s):  Location: 5 Tipping Drive, Branford, CT 06405  Material Safety Data Sheets (MSDS) wrer not maintained in the workplace for products and chemcials such as but not limited to diesel fuel, gasoline, hydraulic fluid, brake fluid and antifreeze.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  Location: 5 Tipping Drive, Branford, CT 06405  Each employee was not provided with training and information on the hazardous products and chemicals such as but not limited to diesel fuel, gasoline, hydraulic fluid, brake fluid and antifreeze.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338944945.