MARSHALL, TX —
OSHA Inspection: SNIDER INDUSTRIES, LLP
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SNIDER INDUSTRIES, LLP in 3311 SUE BELLE LAKE RD., MARSHALL, TX 75670 (NAICS 321113). OSHA activity number 338945421.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SNIDER INDUSTRIES, LLP
- Site address
- 3311 SUE BELLE LAKE RD.
- City
- MARSHALL
- State
- TX
- ZIP
- 75670
- Mailing
- 3311 SUE BELLE LAKE ROAD, MARSHALL, TX 75670
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 122
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.23 C03
- Issued
- Apr 30, 2013
- Abate by
- May 10, 2013
- Penalty
- Initial $3,960 · Current $0 Reduced
General-duty citation text
29 CFR 1910.23(c)(3): Open-sided floors, walkways, platforms, or runways above or adjacent to dangerous equipment, was not guarded with a standard railing and toe board: This violation most recently occurred on March 08, 2013, at a work place located at 3311 Sue Belle Road, Marshall, TX 75670; where employees walked over the top of the chipper feed conveyor which was not guarded with a standard railing and toe board.
Recent events (3)
- — F (S) $0
- — C (S) $3960
- — Z (S) $3960
1910.305 B02 I
- Issued
- Apr 30, 2013
- Abate by
- May 10, 2013
- Penalty
- Initial $6,930 · Current $6,930
General-duty citation text
29 CFR 1910.305(b)(2)(i): Each pull boxes, junction boxes, and fittings in completed installations did not have a cover, face plate, or fixture canopy: This violation most recently occurred on March 08, 2013, at a work place located at 3311 Sue Belle Road, Marshall, TX 75670; where a Square D Model F016169785-005 Motor Control was missing covers and face plates, exposing employees to energized electrical conductors.
Recent events (3)
- — F (S) $6930
- — C (S) $6930
- — Z (S) $6930
1910.305 G01 IV A
- Issued
- Apr 30, 2013
- Abate by
- May 24, 2013
- Penalty
- Initial $5,940 · Current $5,940
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and cables were used as a substitute for fixed wiring of the structure: This violation most recently occurred on March 08, 2013, at a work place located at 3311 Sue Belle Road, Marshall, TX 75670; where the employer did not ensure that flexible cords and cables were not used as a substitute for fixed wiring of the structure.
Recent events (3)
- — F (S) $5940
- — C (S) $5940
- — Z (S) $5940
1910.212 A01
- Issued
- Apr 30, 2013
- Abate by
- May 10, 2013
- Penalty
- Initial $13,860 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: This violation most recently occurred on March 08, 2013, at a work place located at 3311 Sue Belle Road, Marshall, TX 75670; where employees working in the saw mill area were not protected from hazards such as those created by point of operation, ingoing nip points, rotating parts of conveyors in the following instances: Instance a.): Ingoing nip points located between the rotating belts and components on the Reman / Edger conveyor number one; Instance b.): Ingoing nip points located between the rotating belts and components on the Reman / Edger conveyors number two; Instance c.): Ingoing nip points located between the rotating belts and components on the Reman / Edger conveyors number three; Instance d.): Ingoing nip points located between the rotating belts and components on the Reman / Edger conveyors number four; Instance e.): Ingoing nip points located between the rotating sprocket and chain components on the Hemco Trimmer conveyor. SNIDER INDUSTRIES, LLP WAS PRECVIOUSLY CITED FOR A VIOLATION OF 29 CFR 1910.212(a)(1) OR IT'S EQUVALENT, WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 3309545382, CITATION NUMBER 01, ITEM 04, AND WAS AFFIRMED AS FINAL ORDER ON MARCH 13, 2008, WITH RESPECT TO A WORKPLACE LOCATED AT 3311 SUE BELLE LAKE ROAD, MARSHALL, TEXAS 75670.
Recent events (3)
- — F (R) $0
- — C (R) $13860
- — Z (R) $13860
More inspections at Snider Industries, LLP
View Snider Industries, LLP's full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338945421.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.