SAINT JOSEPH, MO ·
OSHA Inspection: VAN AM TOOLING AND ENGINEERING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of VAN AM TOOLING AND ENGINEERING in 5025 EASTON ROAD, SAINT JOSEPH, MO 64507 (NAICS 332710). OSHA activity number 338947872.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VAN AM TOOLING AND ENGINEERING
- Site address
- 5025 EASTON ROAD
- City
- SAINT JOSEPH
- State
- MO
- ZIP
- 64507
- Mailing
- 5025 EASTON ROAD, SAINT JOSEPH, MO 64507
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 55
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.37 B04
- Issued
- Mar 26, 2013
- Abate by
- May 10, 2013
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
29 CFR 1910.37(b)(4): Signs were not posted along the exit access indicating the direction of travel to the nearest exit and exit discharge when the direction of travel to the exit or exit discharge was not immediately apparent: On or about March 6th, 2013, at a job site located at or near 5025 Easton Road in Saint Joseph, Missouri, one or more workers were exposed to hazards associated with exit access and egress due to the direction of travel and exit signage not being apparent. Abatement certification for this violation is required. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- · I (S) $1960
- · Z (S) $2800
1910.303 G02 I
- Issued
- Mar 26, 2013
- Abate by
- May 10, 2013
- Penalty
- Initial $4,900 · Current $3,430 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the any means. On or about March 6th, 2013, at a job site located at or near 5025 Easton Road in Saint Joseph, Missouri, one or more workers were exposed to electrical shock/burn hazards on a pendant that powered an 2 ton crane. Abatement certification for this violation is required. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- · I (S) $3430
- · Z (S) $4900
1910.305 B01 II
- Issued
- Mar 26, 2013
- Abate by
- May 10, 2013
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: On or about March 6th, 2013, at a job site located at or near 5025 Easton Road in Saint Joseph, Missouri, one or more workers were exposed to electrical hazards due to a electrical cabinet not being effectively closed. Abatement certification for this violation is required. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- · I (S) $1960
- · Z (S) $2800
1910.305 G02 II
- Issued
- Mar 26, 2013
- Abate by
- May 10, 2013
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap: On or about March 6th, 2013, at a job site located at or near 5025 Easton Road in Saint Joseph, Missouri, one or more workers were exposed to electrical hazards due to the exposure of electrical wires caused from strain releif. Abatement certification for this violation is required. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- · I (S) $1960
- · Z (S) $2800
More inspections at VAN AM Tooling and Engineering
View VAN AM Tooling and Engineering's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 338947872.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.