ERIE, PA ·
OSHA Inspection: ANGELO'S TRANSMISSIONS
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of ANGELO'S TRANSMISSIONS in 214 WEST 16TH STREET, ERIE, PA 16501 (NAICS 811198). OSHA activity number 338948995.
What this inspection record means
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Angelo'S Transmissions for free
Get an email when a new federal OSHA severe-injury report for Angelo'S Transmissions is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- ANGELO'S TRANSMISSIONS
- Site address
- 214 WEST 16TH STREET
- City
- ERIE
- State
- PA
- ZIP
- 16501
- Mailing
- 214 WEST 16TH STREET, ERIE, PA 16501
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811198
- Employees
- 8
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.303 G02 I
- Issued
- Apr 19, 2013
- Abate by
- May 15, 2013
- Penalty
- Initial $1,600 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): The employer did not ensure that live parts of electric equipment operating at 50 volts or more was guarded against accidental contact by use of approved cabinets or other forms of approved enclosures: a.) Left side of door to parts room - On or about March 5, 2013, company employees were potentially exposed to the live wires and conductors leading into an open, unguarded 220V circuit breaker panel box.
Recent events (2)
- · I (S) $1000
- · Z (S) $1600
1910.305 B02 I
- Issued
- Apr 19, 2013
- Abate by
- May 15, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): the employer did not ensure that all pull boxes, junction boxes, and fittings were provided with covers identified for the purpose. a.) Left side of door to parts room - On or about March 5, 2013, company employees were potentially exposed to the live wires and conductors leading into an open, unguarded 220V circuit breaker panel box.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.215 A04
- Issued
- Apr 19, 2013
- Abate by
- May 15, 2013
- Penalty
- Initial $1,200 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): the employer did not ensure that work rests were used to support the work on off-hand grinding machines. a.) Jim's Area - On or about March 5, 2013, company employees were potentially exposed to the hazards associated with using a Delta Shop Master bench grinder without a work rest guard for the abrasive wheel. ABATEMENT NOTE: The work rest shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
Recent events (2)
- · I (S) $0
- · Z (S) $1200
1910.215 B09
- Issued
- Apr 19, 2013
- Abate by
- May 15, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The employer did not ensure that safety guards of the types described in Subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, were constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. a.) Jim's Area - On or about March 5, 2013, company employees were potentially exposed to the hazards associated with using a Delta Shop Master bench grinder without a tongue guard for the abrasive wheel. ABATEMENT NOTE: The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b)(3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.1200 E01
- Issued
- Apr 19, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $1,200 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met. a.) Angelo's Transmissions - On or about March 5, 2013, automotive technicians worked with and around various auto engine oils, lubricants, cleaners and transmission oils. The company had not written, developed and implemented a Hazard Communication Program.
Recent events (2)
- · I (S) $1000
- · Z (S) $1200
1910.1200 H01
- Issued
- Apr 19, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): The employer did not provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. a.) Angelo's Transmissions - On or about March 5, 2013, automotive technicians worked with and around various auto engine oils, lubricants, cleaners and transmission oils. The company had not conducted Hazard Communication training with employees.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.1200 F06 II
- Issued
- Apr 19, 2013
- Abate by
- May 15, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(6)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace is labeled, tagged or marked with a product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals: a.) Angelo's Transmissions - On or about March 5, 2013, an unlabeled storage tank, containing transmission oil/fluid, was not labeled to identify the contents/product in the tank or the hazards of the material contained in the tank.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 811198)
Aug 4, 2026
Unlimited Power Washing LLC · NEW BEDFORD, MA
Jul 31, 2026
Charles Barker Luxury Imports, INC. · VIRGINIA BEACH, VA
Jul 30, 2026
Tire Choice Auto Service Centers · PORTSMOUTH, VA
Jul 24, 2026
Northstar Auto and Salvage LLC · EVANS MILLS, NY
Jul 21, 2026
Anderson Tire Company, INC. · DILLWYN, VA
More inspections in PA
Aug 6, 2026
Rock Hollow Roofing LLC · SAINT MARYS, PA
Aug 6, 2026
Metallurgical Products Company LLC · WEST CHESTER, PA
Aug 6, 2026
Rogele, INC. · BOILING SPRINGS, PA
Aug 5, 2026
Hatzel & Buehler, INC. · RIDLEY PARK, PA
Aug 5, 2026
Double H Packaging, INC · WARMINSTER, PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338948995.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.