SCHAUMBURG, IL ·
OSHA Inspection: RUMMELHOFF CONSTRUCTION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RUMMELHOFF CONSTRUCTION, INC. in 1010 KNOLLWOOD DR., SCHAUMBURG, IL 60194 (NAICS 236118). OSHA activity number 338951213.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RUMMELHOFF CONSTRUCTION, INC.
- Site address
- 1010 KNOLLWOOD DR.
- City
- SCHAUMBURG
- State
- IL
- ZIP
- 60194
- Mailing
- 2449 N. NEWCASTLE AVE., CHICAGO, IL 60707
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236118
- Employees
- 10
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.100 A
- Issued
- Mar 25, 2013
- Abate by
- Mar 29, 2013
- Penalty
- Initial $1,600 · Current $0 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns: a) Employees were not wearing protective helmets where there was a possible danger of head injury from falling objects. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $0
- · Z (S) $1600
1926.304 I01
- Issued
- Mar 25, 2013
- Abate by
- Mar 29, 2013
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1926.304(i)(1): Each circular had-fed ripsaw was not guarded by a hood which completely enclosed that portion of the saw above the table and that portion of the saw above the material being cut. a) No guard was in place for the portion of the saw above the table on a DeWalt DW744 table saw. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $0
- · Z (S) $2000
1926.403 B02
- Issued
- Mar 25, 2013
- Abate by
- Mar 29, 2013
- Penalty
- Initial $1,200 · Current $0 Reduced
General-duty citation text
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: a) An indoor powerstrip was being used outdoors to power tools on the jobsite, which is not in accordance with the listing and labeling of the equipment. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $0
- · Z (S) $1200
1926.405 G02 IV
- Issued
- Mar 25, 2013
- Abate by
- Mar 29, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: a) An extension cord being used by employees did not have the proper strain relief to prevent the pull form being directly transmitted to the joints or terminal screws as evidence by the exposed insulated conductors. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.416 E01
- Issued
- Mar 25, 2013
- Abate by
- Mar 29, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: a) The power cord for the DeWalt DW744 table saw used by employees had been damaged and taped back together. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.453 B02 V
- Issued
- Mar 25, 2013
- Abate by
- Mar 29, 2013
- Penalty
- Initial $1,600 · Current $0 Reduced
General-duty citation text
29 CFR 1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift: a) Employees were exposed to the hazard of falling while working from an Aichi SP460CJ aerial lift platform without wearing fall protection. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $0
- · Z (S) $1600
More inspections in this industry (NAICS 236118)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338951213.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.