DEPEW, NY —
OSHA Inspection: CORTESE CONSTRUCTION SERVICES CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CORTESE CONSTRUCTION SERVICES CORPORATION in 2300 GEORGE URBAN BOULEVARD, DEPEW, NY 14043 (NAICS 236118). OSHA activity number 338959588.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CORTESE CONSTRUCTION SERVICES CORPORATION
- Site address
- 2300 GEORGE URBAN BOULEVARD
- City
- DEPEW
- State
- NY
- ZIP
- 14043
- Mailing
- 2300 GEORGE URBAN BOULEVARD, DEPEW, NY 14043
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236118
- Employees
- 8
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.23 D01 IV
- Issued
- Mar 20, 2013
- Abate by
- Apr 20, 2013
- Penalty
- Initial $1,890 · Current $0 Reduced
General-duty citation text
29 CFR 1910.23(d)(1)(iv): On stairways more than 44 inches wide but less than 88 inches wide, did not have one handrail on each enclosed side and one stair railing on each open side. a) On or about 3/18/13 at the stairway leading from the storage/file room to the downstairs storage; the stairway width was 46 inches and the only handrail was on the left side descending. Abatement Certification
Recent events (2)
- — I (O) $0
- — Z (S) $1890
1910.213 H01
- Issued
- Mar 20, 2013
- Abate by
- Apr 20, 2013
- Penalty
- Initial $2,520 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material: a) On or about 3/18/13 outside the front door of shop; Makita brand chop saw being used to cut wood did not have a guard on the lower portion of the saw blade exposing employee to contact with rotating sharp object. Abatement Certification
Recent events (2)
- — I (O) $0
- — Z (S) $2520
1910.303 B07 IV
- Issued
- Mar 20, 2013
- Abate by
- Apr 20, 2013
- Penalty
- Initial $2,520 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(7)(iv): There were damaged parts that may adversely affect safe operation or mechanical strength of the equipment, such as parts that are cut. a) On or about 3/18/13 at the front door of the shop; the insulation on the yellow extension cord ( cord set ) was cut exposing the conductors. Abatement Certification
Recent events (2)
- — I (S) $0
- — Z (S) $2520
1910.305 A02 X
- Issued
- Mar 20, 2013
- Abate by
- Apr 20, 2013
- Penalty
- Initial $0 · Current $1,000
General-duty citation text
29 CFR 1910.305(a)(2)(x): Flexible cords and cables were not protected from accidental damage, as might be caused, for example, by sharp corners, projections, and doorways or other pinch points. a) On or about 3/18/13 at the front door of the shop; the orange extension cord ( cord set ) was being run between the door frame and the closed front door of the shop, providing power to the saws located behind the white van. Abatement Certification
Recent events (2)
- — I (S) $1000
- — Z (S) $0
1910.1200 E01
- Issued
- Mar 20, 2013
- Abate by
- Apr 20, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, material safety data sheets, and employee information and training will be met, and which also includes the following: a) On or about 3/18/13 throughout the company; employees are using hazardous chemicals, such as but not limited to, liquefied petroleum gas ( LP ) - flammable, coating and adhesives, flammable and skin irritants, and other hazardous chemicals without a site specific written hazard communication program. Abatement Certification
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 236118)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338959588.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.