Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: SUMMIT ASSEMBLY INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of SUMMIT ASSEMBLY INC. in 9447 NIWOT RD, NIWOT, CO 80504 (NAICS 238210). OSHA activity number 338967078.

Watch Summit Assembly INC. — free Get an email when a new federal OSHA severe-injury report for Summit Assembly INC. is published. One employer, no account, unsubscribe in one click.
Site address
9447 NIWOT RD
City
NIWOT
State
CO
ZIP
80504
Mailing
1216 COMMERCE CT., SUITE 3, LAFAYETTE, CO 80026
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238210
Employees
19
Ownership type
A

3 citations on file for this inspection.

1926.501 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1700.00 · Current $1000.00 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.    (a)	Summit Assembly Inc. DBA Summit Integrated Systems, 9447 Niwot Rd, Niwot, CO 80504: On and before March 19, 2013, the employer did not ensure that employees working at a height of approximately 30 feet were provided with an adequate personal fall arrest system.     Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $1000
  • — Z (S) $1700

1926.503 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    (a)	Summit Assembly Inc. DBA Summit Integrated Systems, 9447 Niwot Rd., Niwot, CO 80504: On and before March 19, the employer did not provide employees with training regarding fall hazards.    Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.502 D15

Serious Gravity 5 2 instances 1 exposed
Issued
Abate by
Penalty
Initial $1700.00 · Current $1000.00 Reduced
29 CFR 1926.502(d)(15): Anchorages used for attachment of personal fall arrest equipment were not independent of any anchorage being used to support or suspend platforms and/or were not capable of supporting at least 5,000 pounds (22.2 kN) per employee:    (a)	Summit Assembly Inc. DBA Summit Integrated Systems, 9447 Niwot Rd, Niwot, CO 80504: On and before March 19, 2013, the employer did not ensure that employees were using anchorages rated to support 5,000 pounds. Employees were using weight distribution wires that were not rated per the standard for anchorages    (b)	Summit Assembly Inc. DBA Summit Integrated Systems, 9447 Niwot Rd, Niwot, CO 80504: On and before March 19, 2013, the employer did not ensure that employees were using anchorages rated to support 5,000 pounds. Employees were using a guardrail that was not rated per the standard for an anchorage.    Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $1000
  • — Z (S) $1700

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338967078.