Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WALTER DANIELS CONSTRUCTION CO., INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of WALTER DANIELS CONSTRUCTION CO., INC. in 515 ROOSEVELT RD., GLEN ELLYN, IL 60137 (NAICS 236220). OSHA activity number 338967698.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Walter Daniels Construction CO., INC. — free Get an email when a new federal OSHA severe-injury report for Walter Daniels Construction CO., INC. is published. One employer, no account, unsubscribe in one click.
Site address
515 ROOSEVELT RD.
City
GLEN ELLYN
State
IL
ZIP
60137
Mailing
6316 NORTHWEST HWY., CHICAGO, IL 60631
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
1
Ownership type
A

4 citations on file for this inspection.

1926.501 B04 I

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 8, 2013
Abate by
Apr 18, 2013
Penalty
Initial $1,600 · Current $1,120 Reduced
29 CFR 1926.501(b)(4)(i):     Each employee on walking/working surfaces was not protected from falling through holes (including skylights), more than six feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes.    On March 19, 2013 an employe was not protected from falling through a floor hole, exposing the employee to a fall hazard of approximately 10 feet.    Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $1120
  • — Z (S) $1600

1926.501 B04 II

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 8, 2013
Abate by
Apr 18, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.501(b)(4)(ii):     Each employee on a walking/working surface was not protected from tripping in or stepping into or through holes by covers.    On March 19, 2013 an employee was exposed to a 3 inch floor hole that was not covered, exposing  the employee to a trip hazard.    Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.856 B

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 8, 2013
Abate by
Apr 18, 2013
Penalty
Initial $1,600 · Current $1,120 Reduced
29 CFR 1926.856(b):     During demolition operation(s), floor openings did not have curbs or stop-logs to prevent the mechanical equipment from running over the edge:    On March 19, 2013, the controlling employer did not ensure that a curb or stop log was installed near the floor hole to prevent the skid steer from driving into the floor hole.    Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • — I (S) $1120
  • — Z (S) $1600

1926.502 B01

Other-than-serious 1 instance 1 exposed
Issued
Apr 8, 2013
Abate by
Apr 18, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.502(b)(1):     The top edge height of the top rails, or equivalent guardrail system members, was not 42 inches (1.1 m) plus or minus 3 inches (8 cm) above the walking/working level:Note:  When employees are using stilts, the top edge height of the top rail, or equivalent member, shall be increased an amount equal to the height of the stilts.    On March 19, 2013 an employee was not protected from a fall by a guardrail that measured at least 39 tall, exposing the employee to the hazards associated with a fall.      Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Walter Daniels Construction CO., INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338967698.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.