OSHA Inspection: DAVIS IRON WORKS, LTD

Issued

2013-05-09 00:00:00

Abate by

2013-06-07 00:00:00

Penalty

Initial $2800.00 · Current $1680.00 Reduced

General-duty citation text

29 CFR 1910.23(d)(1): The employer did not provide standard railings or guards on stairways having four or more risers.      On or about March 18, 2013, and times prior thereto, in the beam punch line area, the employer did not provide handrails and mid-rails to the stairs with 4 or more risers exposing employees to fall hazards.

Issued

2013-05-09 00:00:00

Abate by

2013-06-07 00:00:00

Penalty

Initial $2100.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit".      On or about March 18, 2013, and times prior thereto, exit signs were not installed above the emergency exit doors exposing employees to fire hazards at the following locations:    a) in the warehouse, and    b) in the B-Fab shop.

Issued

2013-05-09 00:00:00

Abate by

2013-06-07 00:00:00

Penalty

Initial $2800.00 · Current $1680.00 Reduced

General-duty citation text

29 CFR 1910.213(p)(1): Feed rolls of self-feed sanding machine(s) were not protected with semicylindrical guard to prevent the hands of the operator from coming in contact with the in-running rolls.      On or about March 18, 2013, and times prior thereto, in the Structural Fab area, employees utilized two floor-mounted sanders that did not have guards, exposing employees to caught-by and struck-by hazards.

Issued

2013-05-09 00:00:00

Abate by

2013-06-07 00:00:00

Penalty

Initial $2800.00 · Current $1680.00 Reduced

General-duty citation text

29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel.        On or about March 18, 2013, and times prior thereto, in the machine shop area, the employer did not ensure the bench grinder had a tongue guard exposing employees to struck-by hazards.

Issued

2013-05-09 00:00:00

Abate by

2013-06-07 00:00:00

Penalty

Initial $2100.00 · Current $1680.00 Reduced

General-duty citation text

29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.       On or about March 18, 2013, and times prior thereto, in the B-Fab shop area, employees using compressed air that was not reduced to less than 30 p.s.i. for cleaning purposes were exposed to eye and skin injuries.

Issued

2013-05-09 00:00:00

Abate by

2013-06-07 00:00:00

Penalty

Initial $2100.00 · Current $1260.00 Reduced

General-duty citation text

29 CFR 1910.305(g)(1)(iii): Flexible cords and cables were used for purposes prohibited by subparagraphs (A) through (E) of this paragraph.      On or about March 18, 2013, and times prior thereto, in the maintenance shop area, the employer used a flexible cord as a substitute for a power cord to energize the cathodic protection junction box exposing employees to electrical hazards.