DARIEN, CT —
OSHA Inspection: F&H CARPENTRY SERVICES LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of F&H CARPENTRY SERVICES LLC in 237 MIDDLESEX ROAD, DARIEN, CT 06820 (NAICS 238130). OSHA activity number 338973589.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- F&H CARPENTRY SERVICES LLC
- Site address
- 237 MIDDLESEX ROAD
- City
- DARIEN
- State
- CT
- ZIP
- 06820
- Mailing
- 162 BOUTON STREET, NORWALK, CT 06854
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 5
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.304 I01
- Issued
- Apr 23, 2013
- Abate by
- May 3, 2013
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.304(i)(1): Each circular hand-fed rip saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut: Worksite: The employer did not ensure that the Dewalt table saw that the employees were using to cut and rip wooden trim was equipped with a guard.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1926.307 D01
- Issued
- Apr 23, 2013
- Abate by
- May 1, 2013
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.307(d)(1): Pulley(s) with part(s) seven feet (2.128 m) or less from the floor or work platform were not guarded in accordance with the requirements specified in paragraphs (m) and (o) of this section: Worksite: The pulleys of an air compressor, unknown identification, used to power pneumatic nail guns were not guarded.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1926.307 E01 I
- Issued
- Apr 23, 2013
- Abate by
- May 1, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.307(e)(1)(i): Horizontal belt(s) that were 42 inches or less from the floor were not fully enclosed: Worksite: The horizontal V-belts of an air compressor, unknown identification, used to power pneumatic nail guns were not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1052 C01 II
- Issued
- Apr 23, 2013
- Abate by
- May 1, 2013
- Penalty
- Initial $2,400 · Current $1,680 Reduced
General-duty citation text
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with a stairrail system along each unprotected side or edge: Worksite: The employer did not ensure that the stairway from the first floor to the second floor was equipped with a stairrail system or an equivalent on all unprotecetd sides/edges.
Recent events (2)
- — I (S) $1680
- — Z (S) $2400
More inspections in this industry (NAICS 238130)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338973589.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.