BOULDER, CO ·
OSHA Inspection: R&M PARKER TECH CENTER, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of R&M PARKER TECH CENTER, INC. in 5440 ARAPAHOE, BOULDER, CO 80303 (NAICS 236115). OSHA activity number 338978109.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- R&M PARKER TECH CENTER, INC.
- Site address
- 5440 ARAPAHOE
- City
- BOULDER
- State
- CO
- ZIP
- 80303
- Mailing
- 2846 FALCON PT, LAFAYETTE, CO 80026
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236115
- Employees
- 4
- Ownership type
- Private (A)
Citations
2 citations on file for this inspection.
1926.501 B01
- Issued
- Apr 4, 2013
- Abate by
- Apr 24, 2013
- Penalty
- Initial $1,200 · Current $840 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface having an unprotected side or edge which was six feet (1.8m) or more above a lower level was not protected from falling by the use of a guardrail system, a safety net system, or personal fall arrest system. (a)R&M Parker Tech Center, Inc. @ 5440 Arapahoe, Boulder, CO 80303: On and before March 26th, 2013, the exposing employer did not ensure each employee on a walking/working surface having an unprotected side or edge which was six feet (1.8m) or more above a lower level was protected from falling by the use of a guardrail system, a safety net system, or personal fall arrest system in that, employees were engaged in framing operations on the edge of a roof without fall protection. This condition exposed the employee to a fall hazard of 8'3".
Recent events (2)
- · I (S) $840
- · Z (S) $1200
1926.503 A01
- Issued
- Apr 4, 2013
- Abate by
- Apr 24, 2013
- Penalty
- Initial $1,200 · Current $840 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee who might be exposed to fall hazards: (a)R&D Parker Tech Center, Inc. @ 5440 Arapahoe, Boulder, CO 80303: On and before March 26th, 2013, the exposing employer did not ensure that each employee engaged in framing operations on a commerical building, had been trained to recognize the hazards associated with working at elevations over 6'. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. Employees working on-site had not received fall protection training before working at elevations over 6 feet. The employer did not provide training to a crew of carpenters that were working on the roof of a commercial building installing a structural beam. The condition exposed employees to the hazard of falling from an elevation of approximately 8'3".
Recent events (2)
- · I (S) $840
- · Z (S) $1200
More inspections at R&M Parker Tech Center, INC.
View R&M Parker Tech Center, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 236115)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 338978109.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.