Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: HAMMONTON MOLD CO., INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of HAMMONTON MOLD CO., INC. in 4171 S. BLACK HORSE PIKE, WILLIAMSTOWN, NJ 08094 (NAICS 332710). OSHA activity number 338980477.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Hammonton Mold CO., INC. for free Get an email when a new federal OSHA severe-injury report for Hammonton Mold CO., INC. is published. One employer, no account, unsubscribe in one click.
Site address
4171 S. BLACK HORSE PIKE
City
WILLIAMSTOWN
State
NJ
ZIP
08094
Mailing
4171 S. BLACK HORSE PIKE, WILLIAMSTOWN, NJ 08094
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332710
Employees
14
Ownership type
Private (A)

6 citations on file for this inspection.

1910.147 C01

Serious Gravity 5 1 instance 10 exposed
Issued
May 8, 2013
Abate by
Jun 4, 2013
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:     a)  Production area - A lockout program was not developed or implemented for equipment such as, but not limited to two Hitachi Seiki Hitec-Turn 20SII lathes, a Cincinnati Milacron Talon 210 lathe, two Haas mills, a Makino mill, eight grinding machines, and a 10 kW laser engraver. On or about 3/28/13.   NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (S) $1000
  • · Z (S) $2000

1910.178 L01 I

Serious Gravity 1 1 instance 3 exposed
Issued
May 8, 2013
Abate by
Jun 4, 2013
Penalty
Initial $1,200 · Current $600 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):     a)  Establishment - Employees who operated the Clark propane forklift (model MGCS25MB, serial number 0138MB-0135-6961KOF) were not trained as required by the standard. On or about 3/28/13.   Abatement Note: Forklift operator training consists of a combination of formal instruction (e.g., lecture, discussion, interactive computer based training, video tape, written material, etc.), practical training (demonstration performed by the trainer and practical exercises performed by the trainee), and an evaluation of the operators performance in the workplace.   NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (S) $600
  • · Z (S) $1200

1910.242 B

Serious Gravity 1 1 instance 10 exposed
Issued
May 8, 2013
Abate by
Jun 4, 2013
Penalty
Initial $1,200 · Current $600 Reduced
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:        a)  Production areas - The compressed air used by employees to clean their work areas was measured at over 100 p.s.i. On or about 4/10/13.   NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (S) $600
  • · Z (S) $1200

1910.303 B02

Serious Gravity 1 1 instance 1 exposed
Issued
May 8, 2013
Abate by
Jun 4, 2013
Penalty
Initial $1,200 · Current $600 Reduced
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:    a)  Lathe area, next to the Hitachi Seiki lathe - A metal two outlet receptacle box was being used as an extension cord. The receptacle box was listed and labeled as having to be mounted to a surface. On or abut 4/10/13.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (S) $600
  • · Z (S) $1200

1910.1200 E01

Other-than-serious 1 instance 10 exposed
Issued
May 8, 2013
Abate by
Jun 4, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a)  Establishment - A site specific written chemical hazard communication program was not developed. Employees used chemical products such as, but not limited to acetone, propane, and Hangsterfers S-500 coolant. On or about 3/28/13.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 10 exposed
Issued
May 8, 2013
Abate by
Jun 4, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    a)  Establishment - Training in the hazards of chemicals such as, but not limited to acetone, propane, and Hangsterfers S-500 coolant was not provided for employees who used those products. On or about 3/28/13.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 338980477.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.