SHREVEPORT, LA —
OSHA Inspection: C B & I
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of C B & I in 740 N. MARKET ST., SHREVEPORT, LA 71107 (NAICS 331491). OSHA activity number 338991490.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C B & I
- Site address
- 740 N. MARKET ST.
- City
- SHREVEPORT
- State
- LA
- ZIP
- 71107
- Mailing
- 740 N. MARKET ST., SHREVEPORT, LA 71107
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331491
- Employees
- 160
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- May 16, 2013
- Abate by
- May 31, 2013
- Penalty
- Initial $5,000 · Current $5,000
General-duty citation text
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc. On or about April 2, 2013, the following lathes were not were not provided with chuck guards; a) In the 240 Division Area, an employee was observed operating a Warner and Swasey horizontal lathe, Number 17, Lot 568. There was a mounted part spinning without a chuck guard in-place. b) In the Tool and Die Area, an Okuma lathe, serial number 4104-9514 was not equipped with a chuck guard. c) In the Tool and Die Area, a Monarch, model number B9204FLF2US was not equipped with a chuck guard. d) In the Tool and Die Area, a PBR TM30 was not equipped with a guard for the chuck. e) In the Tool and Die Area a Monarch, manufacturers # 25661 was not equipped with a guard for the chuck.
Recent events (3)
- — F (S) $5000
- — C (S) $5000
- — Z (S) $5000
1910.215 A04
- Issued
- May 16, 2013
- Abate by
- May 16, 2013
- Penalty
- Initial $3,400 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion. On or about April 3, 2013, at the 240 Division Area, a tool grinder work rest was observed to be spaced 3/4 inch from the wheel.
Recent events (3)
- — F (S) $0
- — C (S) $3400
- — Z (S) $3400
1910.178 G02
- Issued
- May 16, 2013
- Abate by
- Jun 5, 2013
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(g)(2): Facilities shall be provided for flushing and neutralizing spilled electrolyte, for fire protection, for protecting charging apparatus from damage by trucks, and for adequate ventilation for dispersal of fumes from gassing batteries. On or about April 3, 2013, at the Shipping Department, a powered industrial truck battery charging area was equiped with an eye wash spray bottle. This spray bottle does not adequately meet the demands of an eye wash station per the ANSI Z358.1 Standard, in that: a) A means shall be provided to flush both eyes simultaneously b) Capable of delivering water to both eyes not less than 1.5 liters per minute c) and allow the eyes to be held open by hand while the system is flushing
Recent events (3)
- — F (S) $0
- — C (S) $5000
- — Z (S) $5000
1910.305 G01 IV A
- Issued
- May 16, 2013
- Abate by
- May 16, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): An extension cord used as a substitute for the fixed wiring of a structure; On or about April 3, 2013, near the 240 Division Area blast booth, an extension cord was observed being utilized to energize a chart recorder which remained stationary as a permanent piece of equipment.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at C B & I
View C B & I's full OSHA safety record →
More inspections in this industry (NAICS 331491)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338991490.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.