MIDLOTHIAN, TX —
OSHA Inspection: RAY'S WELDING SHOP, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RAY'S WELDING SHOP, INC. in 530 CURTIS RAY ROAD, MIDLOTHIAN, TX 76065 (NAICS 811310). OSHA activity number 338994023.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RAY'S WELDING SHOP, INC.
- Site address
- 530 CURTIS RAY ROAD
- City
- MIDLOTHIAN
- State
- TX
- ZIP
- 76065
- Mailing
- 530 CURTIS RAY ROAD, MIDLOTHIAN, TX 76065
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811310
- Employees
- 16
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.178 L01 I
- Issued
- Jun 7, 2013
- Abate by
- Jul 3, 2013
- Penalty
- Initial $2,400 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l). a) On or about November 28, 2012, in the shipping department, employees required to drive the Komatsu 4250 pound forklift, model number F050A12, were not trained, exposing employees to the hazard of being struck.
Recent events (2)
- — I (S) $0
- — Z (S) $2400
1910.179 J03
- Issued
- Jun 7, 2013
- Abate by
- Jul 8, 2013
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months: a) On or about April 5, 2013, center of the production area, monthly inspections were not being performed on the 5-Ton overhead crane, exposing employees to the hazard of being struck by the load.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.184 H05
- Issued
- Jun 7, 2013
- Abate by
- Jul 8, 2013
- Penalty
- Initial $2,400 · Current $1,440 Reduced
General-duty citation text
29 CFR 1910.184(h)(5): Removal from service. Natural and synthetic fiber rope slings shall be immediately removed from service if any of the following conditions are present such as broken or cut fibers: a) On or about April 5, 2013, in the Production Shop, the employees were using a 4 foot wide synthetic fiber sling that was severely cut and frayed, exposing employees to the hazard of being struck by the load.
Recent events (2)
- — I (S) $1440
- — Z (S) $2400
1910.215 B09
- Issued
- Jun 7, 2013
- Abate by
- Jul 8, 2013
- Penalty
- Initial $2,400 · Current $1,440 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): Exposure adjustment. Safety guards of the types described in Subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. a) On or about April 5, 2013, in the production department, no tongue guards were provided on the 10" Delta Bench Grinder, exposing employees to the hazard of being struck by the wheel.
Recent events (2)
- — I (S) $1440
- — Z (S) $2400
1910.1200 E01
- Issued
- Jun 7, 2013
- Abate by
- Jul 8, 2013
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, material safety data sheets, and employee information and training will be met, and which also includes the following: a) On or about April 5, 2013, there was no hazard communication program developed or maintained, when employees are using chemicals such as, but not limited to, C&C Painting Blastic Blue, and Sherman Wiliiams Lacquer Thinner, exposing employees to the hazard of skin irritations.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.22 D01
- Issued
- Jun 7, 2013
- Abate by
- Jul 3, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(d)(1): On every building or other structure, or part thereof, used for mercantile, business, industrial or storage purposes, the loads approved by the building official were not marked on plates of approved design and securely affixed in a conspicuous place in each space to which they relate. a)On or about April 5, 2013, in the shipping department, there was no load capacity sign attached to the 10ft. high overhead stroage area, exposing employees to the hazard of falling material.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 C01
- Issued
- Jun 7, 2013
- Abate by
- Jul 3, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: (a) On or about April 5, 2013, the Kidde fire extinguisher was not identified, exposing employees to the hazard of fire.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Ray'S Welding Shop, INC.
View Ray'S Welding Shop, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 811310)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338994023.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.