WESTERNVILLE, NY —
OSHA Inspection: G. J. OLNEY, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of G. J. OLNEY, INC. in 9057 DOPP HILL ROAD, P.O. BOX 280, WESTERNVILLE, NY 13486 (NAICS 333241). OSHA activity number 338998867.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- G. J. OLNEY, INC.
- Site address
- 9057 DOPP HILL ROAD, P.O. BOX 280
- City
- WESTERNVILLE
- State
- NY
- ZIP
- 13486
- Mailing
- 9057 DOPP HILL ROAD, P.O. BOX 280, WESTERNVILLE, NY 13486
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333241
- Employees
- 9
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.252 C02 I B
- Issued
- Jun 10, 2013
- Abate by
- Jul 13, 2013
- Penalty
- Initial $1,200 · Current $840 Reduced
General-duty citation text
29 CFR 1910.252(c)(2)(i)(B): Mechanical ventilation was not provided in a room having a ceiling height of less than 16 feet (5 m): a) Welding area, on or about 4/16/13: Mechanical ventilation was not provided for an employee welding on stainless steel in a room with ceiling height of 10 feet. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $840
- — Z (S) $1200
1910.1026 L02 I
- Issued
- Jun 10, 2013
- Abate by
- Jul 13, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1026(l)(2)(i): Prior to initial job assignment to an area where employees were subject to chromium (VI) exposure, the employer did not ensure that each employee can demonstrate knowledge in the content of this section, and the purpose and description of the medical surveillance program required by paragraph (k) of this section. a) Welding area, on or about 4/16/13: An employee exposed to .00087 milligrams per cubic meter of chromium VI was not provided with training on the contents of 29 CFR 1910.1026, The OSHA Chromium VI Standard. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1026 M01 III
- Issued
- Jun 10, 2013
- Abate by
- Jul 13, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1026(m)(1)(iii): The employer did not ensure that employee exposure records for chromium (VI) were maintained and made available in accordance with the standard for Access to Employee Exposure and Medical Records, 29 CFR 1910.1020: a) Welding area, on or about 4/16/13: Employees exposed chromium VI dust and fumes from grinding and welding on stainless steel were not notified annually of their right to access medical and exposure records including, but not limited to, sampling results as performed by New York State Department of Labor - OSHA Consutative Services. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 G01
- Issued
- Jun 10, 2013
- Abate by
- Jun 10, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet (MSDS) for each hazardous chemical in use: a) Throughout the facility, on or about 4/16/13: An MSDS for carbon steel, on which employees weld, was not available. b) Throughout the facility, on or about 4/16/13: An MSDS for stainless steel, on which employees weld, was not available.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Jun 10, 2013
- Abate by
- Jul 13, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Throughout the facility, on or about 4/16/13: Information and training on hazard communication was not provided for employees welding on carbon and stainless steels. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1020 G01 III
- Issued
- Jun 10, 2013
- Abate by
- Jul 13, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1020(g)(1)(iii): Upon an employee's first entering into employment, and at least annually thereafter, the employer did not inform current employees covered by this section of their rights to access medical and exposure record: a) Throughout the facility, on or about 4/16/13: Employee monitored by NY State Department of Labor OSHA Consultative Services on or about the 2009 calendar year were not notified of their rights to access these air monitoring records. Abatement certification must be submitted for this item
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at G. J. Olney, INC.
View G. J. Olney, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333241)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338998867.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.