UXBRIDGE, MA ·
OSHA Inspection: LENZE AC TECH
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of LENZE AC TECH in 630 DOUGLAS ST., UXBRIDGE, MA 01569 (NAICS 335999). OSHA activity number 339004319.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LENZE AC TECH
- Site address
- 630 DOUGLAS ST.
- City
- UXBRIDGE
- State
- MA
- ZIP
- 01569
- Mailing
- 630 DOUGLAS ST., UXBRIDGE, MA 01569
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 335999
- Employees
- 15000
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.132 D01
- Issued
- May 20, 2013
- Abate by
- May 31, 2013
- Penalty
- Initial $3,750 · Current $500 Reduced
8870
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): Module testing benches, Lenze AC Tech, 630 Douglas Street, Uxbridge, Massachusetts; The employer did not perform a hazard analysis to determine if employees performing tests on energized equipment were required to wear personal protective equipment due to the hazards they were exposed to.
Recent events (2)
- · I (O) $500
- · Z (S) $3750
1910.147 C04 II B
- Issued
- May 20, 2013
- Abate by
- Jun 21, 2013
- Penalty
- Initial $3,750 · Current $6,000
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: Lenze AC Tech, 630 Douglas Street, Uxbridge, Massachusetts; The lockout procedure provided during the inspection did not provide machine specific lockout procedures for equipment in the facility.
Recent events (2)
- · I (S) $6000
- · Z (S) $3750
1910.305 A02 X
- Issued
- May 20, 2013
- Abate by
- May 20, 2013
- Penalty
- Initial $7,000 · Current $750 Reduced
General-duty citation text
29 CFR 1910.305(a)(2)(x): Flexible cords and cables were not protected from accidental damage, as might be caused, for example, by sharp corners, projections, and doorways or other pinch points: Servo/Motec Drive Packaging 5000546, Lenze AC Tech, 630 Douglas Street, Uxbridge, Massachusetts: An extension cord was tightly wrapped around the sharp edges of a metal shelving unit.
Recent events (2)
- · I (O) $750
- · Z (S) $7000
1910.305 G01 III
- Issued
- May 20, 2013
- Abate by
- May 20, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iii): Flexible cords used as permitted in paragraphs (g)(1)(ii)(C), (g)(1)(ii)(G), or (g)(1)(ii)(I) of 29 CFR 1910.305 were not energized from an approved receptacle outlet: Servo/Motec Drive Packaging 5000546, Lenze AC Tech, 630 Douglas Street, Uxbridge, Massachusetts: An extension cord was powered from a relocatable power tap instead of a receptacle outlet.
Recent events (2)
- · I (O) $0
- · Z (S) $0
1910.333 A
- Issued
- May 20, 2013
- Abate by
- May 31, 2013
- Penalty
- Initial $0 · Current $0
8870
General-duty citation text
29 CFR 1910.333(a): Safety related work practices were insufficient to prevent electric shock or other injuries resulting from either direct or indirect elctrical contact, when work was performed near or on equipment or circuits thar were or may have been energized: Electrical test benches, Lenze AC Tech, 630 Douglas Street, Uxbridge, Massachusetts: The safety related work practices for the test benches were not sufficient to prevent employees from coming into contact with energized parts.
Recent events (2)
- · I (O) $0
- · Z (S) $0
More inspections in this industry (NAICS 335999)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339004319.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.