Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LUFTHANSA TECHNIK NORTH AMERICA

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of LUFTHANSA TECHNIK NORTH AMERICA in 78 AIRPORT DRIVE, AUBURN, ME 04210 (NAICS 336411). OSHA activity number 339007536.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Lufthansa Technik North America — free Get an email when a new federal OSHA severe-injury report for Lufthansa Technik North America is published. One employer, no account, unsubscribe in one click.
Site address
78 AIRPORT DRIVE
City
AUBURN
State
ME
ZIP
04210
Mailing
78 AIRPORT DRIVE, AUBURN, ME 04210
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336411
Employees
75
Ownership type
A

5 citations on file for this inspection.

1910.23 A08

Serious Gravity 5 3 instances 3 exposed
Issued
May 9, 2013
Abate by
May 17, 2013
Penalty
Initial $3,150 · Current $2,205 Reduced
29 CFR 1910.23(a)(8): Every floor hole into which persons can accidentally walk were not guarded:     In the following instances floor holes inside the plane were not guarded:         a)    Opening/space for the nose gear wheel.         b)    Two holes in the forward hydraulic bay.
Recent events (2)
  • — I (S) $2205
  • — Z (S) $3150

1910.24 F

Serious Gravity 5 3 instances 10 exposed
Issued
May 9, 2013
Abate by
May 17, 2013
Penalty
Initial $2,520 · Current $1,764 Reduced
29 CFR 1910.24(f): Rise height and tread width were not uniform throughout any flight of stairs including any foundation structure used as one or more treads of the stairs:    Stairs on the staging - The staging stairs on the aft side, mid fuslage, going from the floor to the second level did not have the bottom three risers unifiorm in height.
Recent events (2)
  • — I (S) $1764
  • — Z (S) $2520

1910.28 C14

Serious Gravity 5 1 instance 10 exposed
Issued
May 9, 2013
Abate by
May 17, 2013
Penalty
Initial $3,150 · Current $2,205 Reduced
29 CFR 1910.28(c)(14):  Guardrails were not installed at all open sides on scaffolds more than 10 feet above the ground or floor:     At the Facility - A section of scaffold on the second level, left side aft of the fuselage was missing a 30" section of the guardrail.
Recent events (2)
  • — I (S) $2205
  • — Z (S) $3150

1910.212 A01

Serious Gravity 5 1 instance 5 exposed
Issued
May 9, 2013
Abate by
May 21, 2013
Penalty
Initial $2,520 · Current $1,764 Reduced
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc.:     Back Shop - The JET drill press was not equipped with a guard to protect the operator from the rotating chuck.
Recent events (2)
  • — I (S) $1764
  • — Z (S) $2520

1910.303 G01 II

Other-than-serious 1 instance 2 exposed
Issued
May 9, 2013
Abate by
May 15, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage:  Back Shop - The space in front of the P2 electrical panel was being used for storage of a portable welder.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339007536.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.