OSHA Inspection: ART CARPENTRY, INC.

Issued

Jun 26, 2013

Abate by

Jul 2, 2013

Penalty

Initial $2,800 · Current $1,600 Reduced

General-duty citation text

29 CFR 1926.501(b)(13): Employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph (b). Note:  If using these systems was infeasible or created a greater hazard, the employer should develop and implement a fall protection plan meeting the requirements of paragraph (k) of 1926.502:         a) Employees were exposed to the hazard of falling while performing carpentry work on a 10/12 pitched residential roof surface having a ground top eave height of about 19 feet.         In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Jun 26, 2013

Abate by

Jul 23, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.503(b)(1): The employer did not verify fall protection training by preparing a written certification record:      a) The employer did not prepare written certification records related to employee fall protection training.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).