GRAND JUNCTION, CO —
OSHA Inspection: YOUR WAY SAFETY AND SIGN SUPPLY, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of YOUR WAY SAFETY AND SIGN SUPPLY, INC. in 28 ? RD. BETWEEN PATTERSON RD. AND ORCHARD AVE., GRAND JUNCTION, CO 81501 (NAICS 561990). OSHA activity number 339009649.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- YOUR WAY SAFETY AND SIGN SUPPLY, INC.
- Site address
- 28 ? RD. BETWEEN PATTERSON RD. AND ORCHARD AVE.
- City
- GRAND JUNCTION
- State
- CO
- ZIP
- 81501
- Mailing
- P.O. BOX 1906, GRAND JUNCTION, CO 81502
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561990
- Employees
- 175
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.200 G01
- Issued
- Jun 12, 2013
- Abate by
- Jul 31, 2013
- Penalty
- Initial $6,930 · Current $3,465 Reduced
General-duty citation text
29 CFR 1926.200(g)(1): The employer did not provide the requisite advance warning of construction work being conducted on the traveled way: (a) Your Way Safety & Sign Supply, Inc. at 28 ¼ RD. between Patterson Rd. and Orchard Ave., Grand Junction, CO 81506: On April 11, 2013, the exposing employer did not provide at least one advance warning sign to warn road users of a lane closure on 28 ¼ Rd. heading southbound from Patterson Rd. This condition exposed employees in the work zone to a struck-by hazard. Abatement Note: Among other methods, a feasible and acceptable abatement method to correct this hazard is to ensure proper placement of the advance warning sign. This abatement method is depicted in the Manual on Uniform Traffic Control Devices (MUTCD) Millennium Edition in Figure 6H-30, Interior Lane Closure on Multilane Street (TA-30).
Recent events (2)
- — I (S) $3465
- — Z (S) $6930
1926.200 G02
- Issued
- Jun 12, 2013
- Abate by
- Jul 31, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.200(g)(2): Traffic control signs or devices used for protection of construction workers did not conform to Part VI of the Manual of Uniform Traffic Control Devices (MUTCD): (a) Your Way Safety & Sign Supply, Inc. at 28 ¼ RD. between Patterson Rd. and Orchard Ave., Grand Junction, CO 81506: On April 11, 2013, the exposing employer did not follow the MUTCD to provide proper signs and devices with the required taper length for the lane closure on 28 ¼ Rd. heading southbound from Patterson Rd. This condition exposed employees in the work zone to a struck-by hazard. Abatement Note: Among other methods, a feasible and acceptable abatement method to correct this hazard is to ensure proper placement of the advance warning sign. This abatement method is depicted in the Manual on Uniform Traffic Control Devices (MUTCD) Millennium Edition in Figure 6H-30, Interior Lane Closure on Multilane Street (TA-30). Abatement Note: Among other methods, a feasible and acceptable abatement method to correct this hazard is to ensure proper placement of the advance warning sign. This abatement method is depicted in the Manual on Uniform Traffic Control Devices (MUTCD) Millennium Edition in Figure 6H-22, Right Lane Closure on Far Side of Intersection (TA-22).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.201 A
- Issued
- Jun 12, 2013
- Abate by
- Jul 31, 2013
- Penalty
- Initial $6,930 · Current $3,465 Reduced
General-duty citation text
29 CFR 1926.201(a): Signaling by flaggers and the use of flaggers, including warning garments worn by flaggers did not conform to Part VI of the Manual of Uniform Traffic Control Devices (MUTCD): (a) Your Way Safety & Sign Supply, Inc. at 28 ¼ RD. between Patterson Rd. and Orchard Ave., Grand Junction, CO 81506: On April 11, 2013, the exposing employer did not follow the MUTCD to instruct flaggers to use proper hand-signaling devices to direct traffic. Employees were directing traffic using hand signals without the aid of paddles and/or flags. This condition exposed employees in the work zone to a struck-by hazard. Abatement Note: Among other methods, a feasible and acceptable abatement method to correct this hazard is to ensure the correct hand-signaling devices and procedures are used. This abatement method is depicted in the Manual on Uniform Traffic Control Devices (MUTCD) Millennium Edition in Section 6E.03 Hand-Signaling Devices.
Recent events (2)
- — I (S) $3465
- — Z (S) $6930
More inspections at Your WAY Safety and Sign Supply, INC.
View Your WAY Safety and Sign Supply, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 561990)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339009649.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.