Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: NEW GENERATION, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of NEW GENERATION, INC. in 9 TIDE MILL RD., GREENLAND, NH 03840 (NAICS 453310). OSHA activity number 339011587.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch NEW Generation, INC. — free Get an email when a new federal OSHA severe-injury report for NEW Generation, INC. is published. One employer, no account, unsubscribe in one click.
Site address
9 TIDE MILL RD.
City
GREENLAND
State
NH
ZIP
03840
Mailing
9 TIDE MILL RD., GREENLAND, NH 03840
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
453310
Employees
15
Ownership type
A

3 citations on file for this inspection.

1910.303 C03 I

Serious Gravity 5 1 instance 4 exposed
Issued
May 22, 2013
Abate by
May 29, 2013
Penalty
Initial $1,600 · Current $100 Reduced
29 CFR 1910.303(c)(3)(i): All splices and joints and the free ends of conductors were not covered with an insulation equivalent to that of the conductors or with an insulating device identified for the purpose:    a. Site - On or about April 15, 2013, spliced electrical conductors were not covered or protected to prevent electrical shock hazards.
Recent events (2)
  • — I (S) $100
  • — Z (S) $1600

1910.303 G02 I

Serious Gravity 5 1 instance 4 exposed
Issued
May 22, 2013
Abate by
May 29, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating  at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i):  a. Site - On or about April 15, 2013, a cover was not provided for the open  receptacle box, exposing energized electrical parts.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.36 G02

Deleted Other-than-serious 1 instance 4 exposed
Issued
May 22, 2013
Abate by
May 29, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points.  a. Site - On or about April 15, 2013, the second-story exit access was only 20 inches wide.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View NEW Generation, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339011587.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.