KALISPELL, MT —
OSHA Inspection: MONTANA INDUSTRIAL STICKERS, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MONTANA INDUSTRIAL STICKERS, LLC in 3455 US HWY 93 SOUTH, KALISPELL, MT 59901 (NAICS 423310). OSHA activity number 339013187.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Montana Industrial Stickers, LLC — free
Get an email when a new federal OSHA severe-injury report for Montana Industrial Stickers, LLC is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- MONTANA INDUSTRIAL STICKERS, LLC
- Site address
- 3455 US HWY 93 SOUTH
- City
- KALISPELL
- State
- MT
- ZIP
- 59901
- Mailing
- P.O. BOX 7054, KALISPELL, MT 59904
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423310
- Employees
- 7
- Ownership type
- A
Citations
12 citations on file for this inspection.
1910.23 A08
- Issued
- Aug 1, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.23(a)(8): Every floor hole into which persons can accidentally walk was not guarded: (a) Shop: On or about April 16, 2013 and times prior thereto, employees were exposed to stepping into a 9 inch hole at the bottom of a ladder while using the ladder to access/egress the upper rip saw platform.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1910.23 C01
- Issued
- Aug 1, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards: (a) Shop: On or about April 16, 2013 and times prior thereto, employees were exposed to a fall of approximately eight feet to the machinery or floor below while working on the upper platform.
Recent events (2)
- — I (S) $0
- — Z (S) $2800
1910.24 E
- Issued
- Aug 1, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.24(e): The stairs did not have a uniform combination of rise/tread dimensions: (a) Shop: On or about April 16, 2013 and times prior thereto, employees were exposed a fall while gaining access or descending to the upper rip saw platform. The stairs were uneven in that the top step is approximately twenty inches high and the others are approximately nine inches high.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1910.24 H
- Issued
- Aug 1, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.24(h): Standard railings were not provided on the open sides of all exposed stairways and stair platforms: (a) Shop: On or about April 16, 2013 and times prior thereto, employees were exposed a fall of approximately four feet to the concrete below while using a stairway missing a mid rail to gain access to the Upper Rip Saw.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C01
- Issued
- Aug 1, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury: (a) Shop: On or about April 16, 2013 and at times prior thereto, employees were exposed to the unexpected release of energy while cleaning, repairing and/or replacing parts on equipment such as, but not limited to, the Mereen-Johnson Upper Rip Saw. (b) Shop: On or about April 16, 2013 and at times prior thereto, employees were exposed to the unexpected release of energy while cleaning, repairing and/or replacing parts on equipment such as, but not limited to, the Panel Saw. (c) Shop: On or about April 16, 2013 and at times prior thereto, employees were exposed to the unexpected release of energy while cleaning, repairing and/or replacing parts on equipment such as, but not limited to, the Gang Rip Saw. (d) Shop: On or about April 16, 2013 and at times prior thereto, employees were exposed to the unexpected release of energy while cleaning, repairing and/or replacing parts on equipment such as, but not limited to, the HOG Wood Chipper.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.169 B02
- Issued
- Aug 1, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $1,200 · Current $0 Reduced
General-duty citation text
29 CFR 1910.169(b)(2): Air receiver(s) were not drained frequently and at such intervals as to prevent the accumulation of excessive amounts of liquid in the receiver: (a) Shop: On or about April 16, 2013 and times prior thereto, employees exposed to the hazards associated with a high pressure vessel rupture due to an accumulation of excessive amounts of liquid that compromises the integrity of the Air Compressor.
Recent events (2)
- — I (S) $0
- — Z (S) $1200
1910.178 L03
- Issued
- Aug 1, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.178(l)(3): Powered industrial truck operators did not receive initial training regarding operating instructions, warnings, and precautions for the types of truck the operator was authorized to operate: (a) Shop: On or about April 16, 2013 and times prior thereto, employees were exposed to struck by hazards associated with working around or on the Hyster H80XL Powered Industrial Truck due to lack of adequate operator training in the proper operation of the industrial truck. (b) Shop: On or about April 16, 2013 and times prior thereto, employees were exposed to struck by hazards associated with working around or on the Hyster H65XM Powered Industrial Truck due to lack of adequate operator training in the proper operation of the industrial truck.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.212 A01
- Issued
- Aug 1, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Shop: On or about April 16, 2013 and times prior thereto, employees are exposed to caught in hazards while working around the sticker belt conveyor.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.219 C04 I
- Issued
- Aug 1, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: (a) Shop: On or about April 16, 2013 and times prior thereto, employees are exposed to caught in hazards while working and walking in and around unguarded projecting shaft end of the Conveyor. (b) Shop: On or about April 16, 2013 and times prior thereto, employees are exposed to caught in hazards while working and walking in and around unguarded projecting shaft end of the Mereen-Johnson Rip Saw.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.219 D01
- Issued
- Aug 1, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Shop: On or about April 16, 2013 and times prior thereto, employees were exposed to caught in hazards while working on or around the Mereen-Johnson rip saw with unguarded belt and pulley.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.219 E01 I
- Issued
- Aug 1, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o) (a) Shop: On or about April 16, 2013 and times prior thereto, employees were exposed to caught in hazards from an ingoing nip point while working in and around the unguarded belt and pulley the Mereen-Johnson rip saw with unguarded belt and pulley.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K06
- Issued
- Aug 1, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer: (a) Shop: On or about April 16, 2013 and times prior thereto, employees were provided with N95 Dust Masks without being provided Appendix D of 29 CFR 1910.134.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Montana Industrial Stickers, LLC
View Montana Industrial Stickers, LLC's full OSHA safety record →
More inspections in this industry (NAICS 423310)
Jul 15, 2026
WA317992088 - AD Solutions · EVERETT, WA
Jul 15, 2026
Boise Cascade Building Materials Distribution, L.L.C. · WESTFIELD, MA
Jul 15, 2026
Anxin OAK Distribution LLC · SAN LEANDRO, CA
Jul 9, 2026
NGY Group (Orange County) INC. · SANTA ANA, CA
Jul 9, 2026
161516 - Stephenson Millwork Company, INC. · WILSON, NC
More inspections in MT
Jul 27, 2026
Bradford Roof Management · BILLINGS, MT
Jul 16, 2026
Community Food Co-Op · BOZEMAN, MT
Jul 14, 2026
Kirkness Roofing & Exteriors, INC. · BILLINGS, MT
Jul 14, 2026
The Roofing Guys · BILLINGS, MT
Jul 13, 2026
Salazar Roofing · BILLINGS, MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339013187.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.