CATTARAUGUS, NY ·
OSHA Inspection: ADAMS LUMBER COMPANY INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ADAMS LUMBER COMPANY INC. in 6052 ADAMS ROAD, CATTARAUGUS, NY 14719 (NAICS 321113). OSHA activity number 339013583.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ADAMS LUMBER COMPANY INC.
- Site address
- 6052 ADAMS ROAD
- City
- CATTARAUGUS
- State
- NY
- ZIP
- 14719
- Mailing
- 6052 ADAMS ROAD, CATTARAUGUS, NY 14719
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 14
- Ownership type
- Private (A)
Citations
8 citations on file for this inspection.
1910.147 F03 I
- Issued
- May 6, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $1,700 · Current $1,275 Reduced
General-duty citation text
29 CFR 1910.147(f)(3)(i): A procedure was not utilized to afford the employees a level of protection equivalent to that provided by the implementation of a personal lockout or tagout device when servicing and/or maintenance was performed by a crew, craft, department or other group: a) On or about 04/18/2013 throughout establishment; where the employer's energy control procedure for group lockout during servicing/maintenance by multiple employees included the use of one lock with multiple tags on that one lock. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $1275
- · Z (S) $1700
1910.157 G02
- Issued
- May 6, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $1,700 · Current $1,275 Reduced
General-duty citation text
29 CFR 1910.157(g)(2): The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting was not provided to all employees upon initial employment, and at least annually thereafter: a) On or about 04/18/2013 throughout establishment; where the employer provides portable fire extinguishers for employee use to fight incipient stage fires. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $1275
- · Z (S) $1700
1910.212 A01
- Issued
- May 6, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $1,700 · Current $1,275 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by unguarded saws: a) On or about 04/18/2013 at the grading station; where the upper portion on both of the two trimsaws was unguarded. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $1275
- · Z (S) $1700
1910.219 B01
- Issued
- May 6, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $1,700 · Current $1,275 Reduced
General-duty citation text
29 CFR 1910.219(b)(1): Flywheel(s) with parts seven feet or less above floor(s) or platform(s) were not guarded in accordance with the requirements specified in 29 CFR 1910.219(b)(1)(i) through (b)(1)(iv): a) On or about 04/18/2013 in the mill; where the spoked flywheel for the head saw was not adequately guarded. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $1275
- · Z (S) $1700
1910.219 D01
- Issued
- May 6, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) On or about 04/18/2013 in the mill; where the drive belt/pulley for the head saw was not adequately guarded. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.219 E03 I
- Issued
- May 6, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): a)On or about 04/18/2013 in the mill; where the drive belt and plley for the head saw were accssible from above, from the rip saw operator's platform. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.157 E02
- Issued
- May 6, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly: a) On or about 04/18/2013 throughout establishment; where the extinguishers were last inspected in June of 2011. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.157 E03
- Issued
- May 6, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: a) On or about 04/18/2013 throughout establishment; where the last annual inspection of portable fire extinguishers was performed/certified in 06/2011. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Adams Lumber Company INC.
View Adams Lumber Company INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339013583.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.